Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
Finnery Construction Inc. - Paint Transit Center Buildings Roof
AGREEMENT CITY OF YAKIMA INVITATION TO QUOTE #22621 S THIS AGREEMENT, entered into on the date of last execution, between the City of Yakima, a Washington municipal corporation ("City"), and Finnery Construction Inc., ("Contractor"). WITNESSETH: The parties, in consideration of the terms and conditions herein, do hereby covenant and agree as follows: 1. Scope of Work The Contractor shall perform all work and service(s) and furnish all tools, materials, labor and equipment (collectively referred to as "Services") according to the procedure outlined in the specifications of Quote #22621S titled Paint Roofs — Transit Transfer Center and the quote documents, which are all attached and incorporated herein as Exhibit A, and any applicable construction standard(s), which are by this reference incorporated herein and made a part hereof, and shall perform any alterations in or additions to the work provided under this Contract and every part thereof. Work is estimated to be complete by August 5, 2026. Final work schedule shall be coordinated with Project Coordinator Jim Hogenson, Transit Manager, 509-576-6424 or 509-307-2103 The Contractor shall provide and bear the expense of all equipment; work and labor of any sort whatsoever that may be required for the transfer of materials and completing the work provided for in this Contract and every part thereof, except such as are mentioned in the specifications to be furnished by the City of Yakima. 2. Compensation The City agrees to pay the Contractor according to Exhibit B, attached hereto and incorporated herein, which Exhibit includes the specifications and payment schedule of itemized prices as listed in the Contractor's Quote submittal at the time and in the manner and upon the conditions provided for the Contract. 3. Agency Relationship between City and Contractor Contractor shall, at all times, be an independent Contractor and not an agent or representative of City with regard to performance of the Services. Contractor shall not represent that it is, or hold itself out as, an agent or representative of City. In no event shall Contractor be authorized to enter into any agreement or undertaking for, or on behalf, of City. 4. Successors and Assigns a. Neither the City, nor the Contractor, shall assign, transfer, or encumber any rights, duties, or interests accruing from this Contract without the prior written consent of the other. b. The Contractor for himself, and for his heirs, executors, administrators, successors, and assigns, does hereby agree to the full performance of all the covenants herein contained upon the part of the Contractor. 5. Property Rights All records or papers of any sort relating to the City and to the project will at all times be the property of the City and shall be surrendered to the City upon demand. All information concerning the City and said project which is not otherwise a matter of public record or required by law to be made public, is confidential, and the Contractor will not, in whole or part, now or at any time disclose that information without the express written consent of the City. 6. Accounting Records The contractor agrees to establish and maintain for the Project either a separate set of accounts of separate accounts within the framework of an established accounting system that can be identified with the Project. The Contractor agrees that all checks, payrolls, invoices, contracts, vouchers, orders, or other accounting documents pertaining in whole or in part to the Project shall be clearly identified, readily accessible, and available to WSDOT upon request, and, to the extent feasible, kept separate from documents not pertaining to the Project. 7. Inspection and Production of Records a. The records relating to the Services shall, at all times, be subject to inspection by and with the approval of the City, but the making of (or failure or delay in making) such inspection or approval shall not relieve Contractor of responsibility for performance of the Services in accordance with this Contract, notwithstanding the City's knowledge of defective or non -complying performance, its substantiality or the ease of its discovery. Contractor shall provide the City with sufficient, safe, and proper facilities, and/or send copies of the requested documents to the City. Contractor's records relating to the Services will be provided to the City upon the City's request. b. Contractor shall promptly furnish the City with such information and records which are related to the Services of this Contract as may be requested by the City. Until the expiration of six (6) years after final payment of the compensation payable under this Contract, or for a longer period if required by law or by the Washington Secretary of State's record retention schedule, Contractor shall retain and provide the City access to (and the City shall have the right to examine, audit and copy) all of Contractor's books, documents, papers and records which are related to the Services performed by Contractor under this Contract. If any litigation, claim or audit is started before the expiration of the six (6) year period, the records shall be retained until all litigation, claims, or audit findings involving the records have been resolved. c. All records relating to Contractor's services under this Contract must be made available to the City, and the records relating to the Services are City of Yakima records. They must be produced to third parties, if required pursuant to the Washington State Public Records Act, Chapter 42.56 RCW, or by law. All records relating to Contractor's services under this Contract must be retained by Contractor for the minimum period of time required pursuant to the Washington Secretary of State's records retention schedule. d. The terms of this section shall survive any expiration or termination of this Contract. 8. Work Made for Hire All work the Contractor performs under this Contract shall be considered work made for hire and shall be the property of the City. The City shall own any and all data, documents, plans, copyrights, specifications, working papers, and any other materials the Contractor produces in connection with this Contract. On completion or termination of the Contract, the Contractor shall deliver these materials to the City. 9. Guarantee Contractor warrants the Services will be free from defects in material and workmanship for a period of one year following the date of completion and acceptance of the Services. 10. Compliance with Law Contractor agrees to perform all Services under and pursuant to this Contract in full compliance with any and all applicable laws, rules, and regulations adopted or promulgated by any governmental agency or regulatory body, whether federal, state, local, or otherwise. Contractor shall procure and maintain all applicable and necessary permits, licenses and approvals of any federal, state, and local govemment or govemmental authority or this project, pay all charges and fees, and give all notices necessary and incidental to the due and lawful execution of the work. a. Procurement of a City Business License. Contractor must maintain a City of Yakima Business License and pay all charges, fees, and taxes associated with said license. Contractor must provide proof of a valid Washington Department of Revenue state excise tax registration number, as required in Title 85 RCW. O D�G b Conba�n/must pmvNopmu � ��aua|Wa»Nn�nnS��Contractor Registration � onnumho c. Conbedormu�pnm�ep�o ofawaUdWasNn�ondnpa�m��st ate number, asrequired inTido82RCVY. d. Contractor must provide proof of a valid Washington Unified Business Identification (UB|) number. Contractor must have aouoeniUB| number and not bedisqua|i�ed�om bidding onany public works contract YV undnrR�39.O8.01Oor3S12.O05(3). e. ConhaCNrmust pmvida pmofofa valid Washington Employment Security Department number as required UyTiUaS0RCVV. f Foreiqn(Nan'VVoahingNn)CnnPorVhono: Although the City does not require hzmiQncorporate pmpouem to quo|i�iothe City, County orState prior tosubmibing a proposal, itia specifically understood and agreed that any such corporation will promptly U ytmke�necessary measures ho become authorized to oondudbusiness inthe City nfYaNmaottheir own expense, without regard 0nwhether such cnrponadnn ioa�uoUyawarded the contract, and mthe event that the award inmade, pdortoconducting any bu�neoa in the City 11. PravaUiogVVooes The Conbac�rmjUcomplyw�ha||pmvismnxofChap�VV Chapter p�vmUin8\�ouesonPubUWor k. a.R��.1lO10'�P F��W�. U�o�����U�������d��n the appropriate p�vaUingwognrakahx#`oaomineabwingpmv�eU. b. RCVV39-12,O4O-Statement ofIntent toPay Prevailing VVmgosand anAffidm�tufVVageoPaid, Before on awarding agency may pay any sum duo on account, it must receive u statement nfIntent hz Pay PmvaUingWages app�meUbythe Dopa�nontofLabor and |ndu�hem. Following Una|acceptance ofa public work project, �e�, and before any final money is disbursed, each Contractor and Subcontractor must submit to the awarding agency on Affidavit of Wages paid, certified by the Dopa�mentofLabor and |ndusiheo. VV c R�3S12.O7O-FeesAuthohzodhorAppmve|CodifinaUnnnndArUltradons. Any fees charged by the Depo�meninfLabor and |ndusidemfor oppmva|aorfees Vzcover com�ofarbi1raVonconducted shall be the responsibility ofthe CmnUachor The State ofYVoshinghonprevailing wage rates applicable for this public works p 'ect.whichin|ocaiedinYakima Coun�.may hofound atthe following webs|teaddmnsnfthe Dapo�men(ofLabor and |ndushies: h�>�//|niwaoov|ic�n�inq-�ar�i\o/pubh��o,ks-�r�a���n�v8i||ng+wege-nobmo. Based onthe quote submine|for this p 'ect.thmapp|icab|eoffecd(s tart)���� for determining provaUingwages isthe quote date, June 11.2028. 12. Ce�ifipdPmyroUfor Nnn'FedomUyFunded Projects re quest questUythe Q�orbyan Interested Party, copies nfce�i�ed payroll shall be provided to City, with employee inb/rmo�nnsuch aslast name, 88Nand address, noda�edinaccordance with RCN/425�23�inorder b)pmvidofor puWicrecords roques�. The City reserves the right to require Contractor to deliver to City copy ofthe non -redacted Certified Payroll ifQ� deAanninea, in its sole discretion, that, such non -redacted copy is necessary ormppmphata in order k) enable City to comply with any applicable law. RCN/42.56,2J0 /�(e) Personal Information Exemption: Any necun1 used to prove identity, mQm` residential address, social security number, or other personal information required to apply for a driver's license or identicard. RCW 39.12.010 (4): An "Interested Party" for the purposes of this chapter shall include a Contractor, Subcontractor, an employee of a Contractor or Subcontractor, an organization whose members' wages, benefits, and conditions of employment are affected by this chapter, and the director of labor and industries or the director's designee. WAC 296-127-320 Payroll: (1) Each Contractor shall keep accurate payroll records for three years from the date of acceptance of the public works project by the contract awarding agency, showing the name, address, Social Security number, trade or occupation, straight time rate, hourly rate of usual benefits as defined by WAC 4(1), andovertime hours worked each day and week, including any employee authorizations executed pursuant to WAC ;'_ , ,(,..,_, and the actual rate of wages paid, for each laborer, worker, and mechanic employed by the Contractor for work performed on a public works project. (2) A Contractor shall, within ten days after it receives a written request, from the department or from any interested party as defined by RCW file a certified copy of the payroll records with the agency that awarded the public works contract and with the department. (3) A Contractor's noncompliance with this section shall constitute a violation of RCW 13. Nondiscrimination During the performance of this Contract, the Contractor agrees as follows: The Contractor shall not discriminate against any person on the grounds of race, creed, color, religion. national origin, sex, age, marital status, sexual orientation, pregnancy, veteran's status, political affiliation or belief, or the presence of any sensory, mental or physical handicap in violation of the Washington State Law Against Discrimination (RCW chapter 49.60) or the Americans with Disabilities Act (42 USC 12101 et seq.). This provision shall include but not be limited to the following: employment. upgrading, demotion, transfer, recruitment. advertising, layoff or termination, rates of pay or other forms of compensation, selection for training, and the provision of Services under this Agreement. Contractor agrees to comply with the applicable provisions of State and Federal Equal Employment Opportunity and Nondiscrimination statutes and regulations. In the event of the Contractor's noncompliance with the non-discrimination clause of this contract or with any such rules, regulations, or orders, this Contract may be cancelled, terminated, or suspended in whole or in part and the Contractor may be declared ineligible for any future City contracts. No provision of this Contract shall require or prohibit action or inaction by either party, or the agent(s) or subcontractor(s) of either party, that would violate Federal, State, or local law or that would affect the City's eligibility for any federal program or receipt of federal funds. The following provisions are included as required by Washington State law. RCW 35.22.650: Contractor agrees that the Contractor shall actively solicit the employment of minority group members. Contractor further agrees that the Contractor shall actively solicit bids for the subcontracting of goods or services from qualified minority businesses. Contractor shall furnish evidence of the Contractor's compliance with these requirements of minority employment and solicitation. Contractor further agrees to consider the grant of subcontracts to said minority bidders on the basis of substantially equal proposals in the light most favorable to said minority businesses. The Contractor shall be required to submit evidence of compliance with this section as part of the bid. Nothing in this Agreement shall require Contractor or any of its subcontractor(s) to take action that would be deemed discrimination or preferential treatment in violation of RCW 49,60.400. Pursuant to RCW 49.60.400(6), this Section does not prohibit action that must be taken to establish or maintain the City's eligibility for any federal program, if ineligibility would result in a loss of federal funds to the City. 14. Pay Transparency Nondiscrimination Provision The Contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 15. Indemnification and Hold Harmless a. Contractor shall take all necessary precautions in performing the Services to prevent injury to persons or property. The Contractor agrees to release, indemnify, defend, and hold harmless the City, its elected and appointed officials, officers, employees, agents, representatives, insurers, attorneys, and volunteers from all liabilities, losses, damages, and expenses related to all claims, suits, arbitration actions, investigations, and regulatory or other governmental proceedings arising from or in connection with this Agreement or the acts, failures to act, errors or omissions of the Contractor, or any Contractor's agent or subcontractor, in performance of this Agreement, except for claims caused by the City's sole negligence. b. Industrial Insurance Act Waiver. It is specifically and expressly understood that the Contractor waives any immunity that may be granted to it under the Washington State industrial insurance act, Title 51 RCW, solely for the purposes of this indemnification. Contractor's indemnification shall not be limited in any way by any limitation on the amount of damages, compensation or benefits payable to or by any third party under workers' compensation acts, disability benefit acts or any other benefits acts or programs. Contractor shall require that its subcontractors, and anyone directly or indirectly employed or hired by Contractor, and anyone for whose acts Contractor may be liable in connection with its performance of this Agreement, comply with the terms of this paragraph, waive any immunity granted under Title 51 RCW, and assume all potential liability for actions brought by their respective employees. The Parties acknowledge that they have mutually negotiated this waiver. c. Should a court of competent jurisdiction determine that this Agreement is subject to RCW 4.24.115, then, in the event of liability for damages arising out of bodily injury to persons or damages to property caused by or resulting from the concurrent negligence of the Contractor and the City, the Contractor's liability, including the duty and cost to defend, shall be only to the extent of the Contractor's negligence. d. Nothing contained in this Section or this Contract shall be construed to create a liability or a right of indemnification in any third party. e. The terms of this section shall survive any expiration or termination of this Contract. 16. Contractor's Liability Insurance At all times during performance of the Services and this Contract, Contractor shall secure and maintain in effect insurance to protect the City and Contractor from and against any and all claims, damages, losses, and expenses arising out of or resulting from the performance of this Contract. If Contractor carries higher coverage limits than the limits stated below, such higher limits shall be shown on the Certificate of Insurance and Endorsements, and the City shall be named as an additional insured for such higher limits. Contractor shall provide and maintain in force insurance at limits no less than that stated below, as applicable. The City reserves the right to require higher limits should it deem it necessary in the best interest of the public. Contractor will provide a Certificate of Insurance to the City as evidence of coverage for each of the policies and outlined herein. A copy of the additional insured endorsement attached to the policy will be included with the certificate. This Certificate of insurance shall be provided to the City, prior to commencement of work. Failure of City to demand such verification of coverage with these insurance requirements or failure of City to identify a deficiency from the insurance documentation provided shall not be construed as a waiver of Contractor's obligation to maintain such insurance. Contractor's insurance coverage shall be primary insurance with respect to those who are Additional Insureds under this Contract. Any insurance, self-insurance or insurance pool coverage maintained by the City shall be in excess of the Contractor's insurance and neither the City nor its insurance providers shall contribute to any settlements, defense costs, or other payments made by Contractor's insurance. All additional insured endorsements required by this Section shall include an explicit waiver of subrogation. If at any time during the life of the Contract, or any extension, Contractor fails to maintain the required insurance in full force and effect, all work under the contract shall be discontinued immediately. Any failure to maintain the required insurance may be sufficient cause for the City to terminate the Contract. The following insurance is required: a. Commercial Liability Insurance Before this Contract is fully executed by the parties, Contractor shall provide the City with a certificate of insurance as proof of commercial liability insurance with a minimum liability limit of Two Million Dollars ($2,000,000.00) per occurrence, combined single limit bodily injury and property damage, and Four Million Dollars ($4,000,000.00) general aggregate. If Contractor carries higher coverage limits, such limits shall be shown on the Certificate of Insurance and Endorsements and the City, its elected and appointed officials, employees, agents, attomeys and volunteers shall be named as additional insureds for such higher limits. The certificate shall clearly state who the provider is, the coverage amount, the policy number, and when the policy and provisions provided are in effect. Said policy shall be in effect for the duration of this Contract. The certificate of insurance and additional insured endorsement shall name the City of Yakima, its elected and appointed officials, employees, agents, attomeys and volunteers as additional insureds, and shall contain a clause that the insurer will not cancel or change the insurance without first giving the City prior written notice. The insurance shall be with an insurance company or companies rated A-VII or higher in Best's Guide and admitted in the State of Washington. The requirements contained herein, as well as City of Yakima's review or acceptance of insurance maintained by Contractor is not intended to and shall not in any manner limit or qualify the liabilities or obligations assumed by Contractor under this contract. b. Automobile Liability Insurance Before this Contract is fully executed by the parties, Contractor shall provide the City with a certificate of insurance as proof of automobile liability insurance with a minimum liability limit of Two Million Dollars ($2,000,000.00) per occurrence. If Contractor carries higher coverage limits, such limits shall be shown on the Certificate of Insurance and Endorsements and the City, its elected and appointed officials, employees, agents, attorneys and volunteers shall be named as additional insureds for such higher limits. The certificate shall clearly state who the provider is, the coverage amount, the policy number, and when the policy and provisions provided are in effect. Said policy shall be in effect for the duration of this Contract. The certificate of insurance and additional insured endorsement shall name the City of Yakima, its elected and appointed officials, employees, agents, attorneys and volunteers as additional insureds, and shall contain a clause that the insurer will not cancel or change the insurance without first giving the City prior written notice. The insurance shall be with an insurance company or companies rated A-VII or higher in Best's Guide and admitted in the State of Washington. The requirements contained herein, as well as City of Yakima's review or acceptance of insurance maintained by Contractor is not intended to and shall not in any manner limit or qualify the liabilities or obligations assumed by Contractor under this contract. The business auto liability shall include Hired and Non -Owned coverage if necessary. c. Employer's Liability (Stop Gap) Contractor and all Subcontractor(s) shall at all times comply with all applicable workers' compensation, occupational disease, and occupational health and safety laws, statutes, and regulations to the full extent applicable, and shall maintain Employer's Liability insurance with a limit of no Tess than $1,000,000.00. The City shall not be held responsible in any way for claims filed by Contractor or its employees for services performed under the terms of this Contract. Contractor agrees to assume full liability for all claims arising from this Contract including claims resulting from negligent acts of all Subcontractor(s). Contractor is responsible to ensure Subcontractor(s) have insurance as needed. Failure of Subcontractors(s) to comply with insurance requirements does not limit Contractor's liability or responsibility. 17. Severability The terms, provisions, covenants and restrictions of the Contract, including any modifications or supplements thereto, are severable. Notwithstanding any other language in this Contract, no provision of this Contract, including any modifications or supplements thereto, shall (a) prohibit action that must be taken to establish or maintain the City's eligibility for any federal program; or (b) require the City to act if such action may risk the City's eligibility for any federal program. If any term(s), provision(s), covenant(s) or restriction(s) of the Contract, including any modifications or supplements thereto, or the application thereof (a) is held invalid, void or unenforceable; or (b) prohibits or requires action by the City that may affect or risk the City's eligibility for a federal program, said term(s), provision(s), covenant(s) and restriction(s) shall be ineffective and the remainder of the terms, provisions, covenants and restrictions shall remain in full force and effect and shall in no way be affected, impaired or invalidated. 18. Contract Documents This Contract, the Invitation to Quote #22519S, Scope of Work, conditions, addenda, and modifications and Contractor's proposal (to the extent consistent with Yakima City documents) constitute the Contract Documents and are complementary. Specific Federal and State laws and the terms of this Contract, in that order respectively, supersede other inconsistent provisions. These Contract Documents are on file in the Office of the Purchasing Manager, 129 No. 2nd St., Yakima, WA, 98901, and are hereby incorporated by reference into this Contract. 19. Termination Termination for Cause In the event the Contractor breaches this Contract, the City may terminate the Contract at its sole discretion in such event that it provides the Contractor with written notice of Contractor's breach and the Contractor fails to cure its breach within 30 days of this notice. In the event the City breaches this Contract, the Contractor may terminate the Contract at its sole discretion in such event that it provides the City with written notice of City's breach and the City fails to cure its breach of the Contract within 60 days of this notice. The following represents a non-exclusive, illustrative list of instances that shall be considered a breach by the Contractor: a. Defaults on an obligation under the Contract; b. Fails to perform any material obligation required under the Contract; c. Files a petition in bankruptcy, becomes insolvent, or otherwise takes action to dissolve as a legal entity; d. Allows any final judgment not to be satisfied or a lien not to be disputed after a legally imposed, 30-day notice; e. Make an assignment for the benefit of creditors; f. Fails to follow the sales and use tax certification requirements of the State of Washington; g. Incurs a delinquent Washington tax liability; h. Becomes a State or Federally debarred Contractor; i. Is excluded from federal procurement and non -procurement Contracts; j Fails to maintain and keep in force all required insurance, permits and licenses as provided in the Contract; k. Fails to maintain the confidentiality of the City information that is considered to be Confidential Information, proprietary, or containing Personally Identifiable Information; I. Contractor performance threatens the health or safety of a City, County or municipal employee. Termination for Convenience The City may terminate the Contract, without cause, by providing 30 days written notice of termination. In the event of termination for convenience, the Contractor shall be entitled to receive compensation for any fees owed under the Contract. The Contractor shall also be compensated for partially completed services. In this event, compensation for such partially completed services shall be no more than the percentage of completion of the services requested, at the sole discretion of the City, multiplied by the corresponding payment for completion of such services as set forth in the Contract. Altematively, at the sole discretion of the City, the Contractor may be compensated for the actual service hours provided. The City shall be entitled to a refund for goods or services paid for but not received or implemented, such refund to be paid within 30 days of written notice to the Contractor requesting the refund. Change in Funding In addition to the above termination provisions, if the funds upon which the City relied to establish this Contract are withdrawn, reduced, or limited, or if additional or modified conditions are placed on such funding, the City may terminate this Contract by providing at least five business days written notice to the Contractor. The termination shall be effective on the date specified in the notice of termination. 20. Dispute Resolution In the event that any dispute shall arise as to the interpretation of this agreement, or in the event of a notice of default as to whether such default does constitute a breach of the contract, and if the parties hereto cannot mutually settle such differences, then the parties shall first pursue mediation as a means to resolve the dispute. If the afore mentioned methods are either not successful then any dispute relating to this Agreement shall be decided in the courts of Yakima County, in accordance with the laws of Washington. If both parties consent in writing, other available means of dispute resolution may be implemented. 21. Prime Contractor Contractor is the Prime Contractor hereunder. The Prime Contractor shall be the sole point of contact with regard to all contractual matters arising hereunder, including the performance of work and the payment of any and all charges resulting from its contractual obligations. 22. Removal of Subcontractor If dissatisfied with the background, performance, and/or general methodologies of any subcontractor, the City may request in writing that the subcontractor be removed. The Contractor shall comply with this request at once and shall not employ the subcontractor for any further work/services under this Contract. 23. Taxes and Assessments Contractor shall be solely responsible for and shall pay all taxes, deductions, and assessments, including but not limited to hsdenm| income hax. F|CA, social security tax, assessments for unemployment and industrial injury insurance, and other deductions from income which may be required by law or assessed against either party as a result of this Contract. In the event the City is assessed a tax or assessment as a result of this Contract, Contractor shall pay the same before itbecomes due. 24. Waiver ofBreach A waiver by eithef party hereto of a breach of the other party hereto of any covenant or condition of this Contract shall not impair the right of the party not in default to avail itself of any subsequent breach thereof. Leniency, delay nrfailure of either party to insist upon strict performance of any agreement, covenant or condition of this Contract, or to exercise any right herein given in any one or more instances, shall not be construed as a waiver or relinquishment of any such agreement, covenant, condition orright. 2iFmce Ma�u� Contractor U'orwinotbnrespnnoibleforde|mysinde|iveryduetoadsofGod.fim.sthkeo.epidcmics,war.riot,ddayin transportation or railcar transport shortages, provided Contractor notifies the City immediately in writing of such pending oractual delay, Normally, in the event of any such delays (acts or God, etc.) the date of delivery will be extended for aperiod equal 8athe time lost due 0othe reason for delay. 26, Governing Law This Contract shall be governed by and construed in accordance with the laws of the State of Washington, 27. Venue "I / The venue for any action to enforce or interpret this Contractshall No in e competent jurisdiction in Yakima County, 28, Authority The person cuhngthis Contract, nnbehalf nfContractor, represents and warrants that they have been fully authorized by Contractor to execute this Contract on its behalf and to legally bind Contractor to all the bermo, performances and provisions ofthis Contract. 29, Change mNotice Any alterations, including changes to the nature of the service, made to the Contract shall be rendered in writing and signed by both responsible pa�oy� no changes wMhoULsuch signed documentation shall be valid, No alterations ou(side the general scope and intent ofthe original Request for Proposals or in excess of allowable and accepted price changes shall be made. In no event shall the Contractor be paid or be entitled to payment for services that are not authorized herein or in any properly executed amendment. Notice of Business Changes: Contractor shall notify the City in writing within three (3) business days of any change in ownership of the facilities of the Contractor or of the facilities of any subcontractor, The Contractor shall notify the City in writing as soon as possible, and in no event later than three (3) business days, after any decision by the Contractor 0ochange ordiscontinue service that will affect services provided Lnthe City under this Contract. The City shall have the right to renegotiate the terms and conditions of this Contract in the extent required to accommodate a change in governing law orpolicy that, in the sole discretion of the Qty, either substantially and unreasonably enlarges the Contractor's duties hereunder, or renders pedunnon:o, enforcement nrcompliance with the totality of the Contract impossible, patently unreasonable, or unnecessary. Notices and demands under and related to this Contract shall be in writing and sent to the parties at their addresses as follows: TO CITY: City of Yakima Purchasing Susan Knotts, NIGP-CPP, CPPB, CPPO Buyer II 129 North Second Street Yakima, WA 98901 TO CONTRACTOR: Finnery Construction Inc. Mallory Bergemann President 5878 SW 441riSt. Port Orchard, WA, 30. Survival The foregoing sections of this Contract, 1-29 inclusive, shall survive the expiration or termination of this Contract in accordance with their terms. IN WITNESS WHEREOF, the parties hereto execute this Contract as of the day and year first above written, CITY OF YAktMA anager FINNERY CONSTRUCTION INC. By: 7/2/2026 Date: Mallory Bergemann, President List of Exhibits attached to this contract Exhibit A — Specifications #226193 Exhibit B — Contractors Quote CitVkIT 't •,n. , -09 q N/Ac EXHIBIT A Specifications Quote #22621S The following blank pages have been removed: ° Bidders Responsibility Criteria Form, pages 1l-12 • Certification ofCompliance with Wage Payment Statutes, page13 • Debarment and Suspension Attestation, page 14 • Sample Agreement, pages15-23 w Sample Certificate mfInsurance with Additional Insured Endorsement and Waiver ofSubrogation, pages 37-39 CITY OF YAKIMA PUBLIC WORKS INVITATION TO QUOTE #22621 a FOR PUBLIC WORK BETWEEN $10,000-$35,000 PROJECT NAME: Paint Roof -Trans Transfer Center LOCATION:105 South 4`' Street, Y-k ,urea, {gift 8901 ISSUE DATE: June ;, CITY PROJECT COORDINATOR NAME/NUMBER: :hat i fttferrscrra, Manager., er., 509.,S 76µ6 2,0, or i >0?7103 RETURN QUOTES TO BUYER: Susan l::i att.s, C ar 11 t Su:: n.lCnott sgY altim aV A,Gov DUE DATE/TIME: :JIM e 21„ 2026 ,a1 2:00 PM P PRO OVERVIEW SMALL WORKS ROSTER PROJECT Contractor must be signed up with WWW.MRSCROSTERS.ORG in order to respond to this Invitation to Quote. PREVAILING WAGE This project is considered Public Work and shall be completed in accordance with 39.04 RCW. This is a Prevailing Wage project. Intent to Pay Prevailing Wages, and Affidavit of Prevailing Wages Paid must be filed by both the General Contractor and any Subcontractors working on the project, at Contractor's expense, and posted as approved by Labor and Industries (L&I) prior to payment, 5ee attached contract for further details, CERTIFICATE OF INSURANCE A Certificate of Insurance with Additional Insured Endorsement with an explicit Waiver of Subrogation is required before work begins. The certificate of insurance and additional insured endorsement shall name "The City of Yakima, its elected and appointed officials, employees, agents, attorneys and volunteers as additional insureds," per the attached sample, with the same limits of coverage. The Certificate needs to be addressed as shown and include an attached Additional Insured Endorsement and an explicit waiver of subrogation, or it will be returned for correction and you will not be able to start work until it is accepted. Subcontractors must also submit Certificates of Insurance with Additional Insured endorsement. See attached contract for further details. SITE VISIT An onsite meeting will be held on June 16, 2026 at 9:00 a.m. at the City of Yakima Transit Transfer Center, located at 105 South 4'h Street, Yakima, WA, 98901. The site meeting is not mandatory; however, interested parties are strongly urged to attend. QUESTIONS All questions shall be submitted to the Buyer, Susan Knotts @ Sttsan.Knotts(rr fakirn WA,Gov three (3) days prior to Quote due date, COORDINATION OF WORK Contractor will coordinate their work with the City of Yakima Project Coordinator listed above as to when work will start and be accomplished. Work shall be completed as agreed upon in the resulting contract. WORK HOURS AND SCHEDULE Work to be completed M-F, 7:00 a.m. to 5:00 p.m., excluding legal holidays. Transit Center is used heavily during the weekdays M-F from 5:45 a.m. to 6:45 p,m. Transit operations ARE NOT to be disrupted by this work. SCOPE OF WORK. Paint topside of Transit Transfer Centers metal roofs; Administrative building, two waiting shelters, bathroom and clock tower, approximately 3,287 square feet. Clean and prep all roofs surfaces. Patch defects. Prime and paint roof of shelters, transit transfer building, bathroom and clock tower with single color. Application surfaces may consist of steel which may contain a zinc (galvanized) or aluminum -zinc alloy coating, or Aluminum, zinc and/or tin (Terne) with a protective coating. All Work shall be done is a workmanlike manner, with all spills and splatters removed and cleaned up thoroughly prior to final payment. City of Yakima Small Works — Invitation to Quote 226215 Page 1 of 45 All work istobedone inaccordance wbhtheN1anufacturer's|nstrucdoms,|ndustryStandards and Specifications ospresented by the City of Yakima. Work shall be performed accordingly to manufacture's recommendation, using specified materials and brands orapproved and acceptable equal. RECOMMENDED PROCESS/MATERIALS Products ?oDeUsed Cleaner: Extra Muscle TM_ PoepainLCleaner Primer: Sherwin-Williams Pro Industrial" Pro'Cry|`Universal Primer B66'13OOSeries Paint: Sherwin-Williams Sher -Cry ywHPAHigh Performance Acrylic Paint Color: Sherwin-Williams Repose Gray #7O1S Examinatiorl inspect roofs for rust, peeling paint, or structural damaUe. Examine substrates and conditions under which painting will be performed for compliance with manufacturer's requirements for application of paint. Notify the owner about anticipated problems using materials specified over substrates. Preparation General Procedures: Remove any hardware, accessories, p|ates, machined surfaces, lighting fixtures, and similar items that are not to be painted or provide surface -applied protection prior to surface preparation and painting. Remove these items if necessary for complete painting ofthe items and adjacent surfaces. Surface Preparation Clean roof with cleaner making sure no film or residue is left on surface and prepare surfaces to be painted in accordancewbh the manufacturer's instructions. Remove loose paint and sand or wire -brush rusty areas to create a smooth surface. Remove any oil and/or grease, and other foreign substances prior tocleaning as recommended by the paint manufacturer. Wash and dean surface to be painted thoroughly to deoxidize and pressure washer nrhose with a power nozzle to remove dirt' mildew, and chalky residue before applying primer. For stubborn organic growth like algae, mold, etc. a diluted bleach solution can be used, followed by rinsing. Allow the surface todry completely before proceeding. Schedule cleaning and painting so that dust and other contaminants from the cleaning process will not fall on wet or newly painted surfaces. Notify owner in writing of problems anticipated with using the specified finish -coat material with substrates prepared. Materials Preparation Carefully mix and prepare primer and paint materials in accordance with manufacturer's directions. Maintain containers used in mixing and application of paint in a dean condition, free of foreign materials and residue. Stir material before application to produce amixture ofuniform density; stir asrequired during application. Donot stir surface film into material. Remove film and ifnecessary, strain material before using. Use only thinners approved by the manufacturer, and only in recommended limits. Tinting Each undercoat is tobemlighter shade ofthe finished color tofacilitate identification of each coat where multiple coats of the same material are applied. Application Apply paint inaccordance with manufacturer's directions. Use applicator and techniques best suited for substrate and type of material being applied. Do not paint over dirt, rust, scale, grease, oil, moisture, scuffed surfaces, or conditions detrimental to the formation of a durable paint film. Wipe down all surfaces tnhepainted right before paint is applied to remove all dust. Apply primer first, then 2 coats of paint, allowing 24-48 hours between coats for proper curing, or as recommended by the manufacturer. DONOT APPLY PAINT DURING DIRECT SUN. Finish coats are to becompatible with primer and/or painted surfaces. City ofmmmaSmal|wvrks—/nvitatm to Quote 226215 Page aofw» The number of coats and thickness required shall be the sane regardless of the application method used. Do not apply succeeding coats until the previous coat has cured amrecommended bythe manufacturer. Sand between applications where sanding is required to produce an even smooth surface in accordance with the manufacturer's directions. Wipe down surface to remove dust before each application. Use brushes and/or rollers for small areas and detailed work and a paint sprayer for large surfaces to achieve even coverage. Seal seams and fasteners carefully toprevent water infiltration. Apply additional coats when undercoats, stains, and other conditions show through the final coat ofpaint until paint film iuofa uniform finish, color, and appearance. Give special attention toensure that surfaces including edges, comers, crevices, welds and exposed fasteners, receive a dry film thickness equivalent to that of flat surfaces. Scheduling of Painrg Apply material to surfaces that have been cleaned, pre-treated or otherwise prepared for painting as soon as practicable after preparation and before subsequent surface deterioration. Allow sufficient time between successive coats topermit proper drying. Donot re -coat until paint has dried and feels firm, and does not deform or feel sticky under moderate thumb pressure and where application of another coat does not cause lifting or loss ofadhesion ofthe undercoat. Minimum Coating Thickness Apply material at not less than the manufacturer's recommended spreading rate. Provide total dry film thickness ofthe entire system asrecommended bythe manufacturer and specified therein. Finishes Completely cover to provide an opaque smooth surface of uniform finish, color,appearance, and coverage. Cloudiness, spotting, laps, brush marks, runs, sags, ropiness or other surface imperfections shall not be accepted work. Completed Work Match approved color samples, texture, and coverage. Remove refinish, or repaint work not in compliance with specified requirements. Following completion ofpainting operations in each space or area, professionally reinstall the items removed totheir original setting. Clean -Up Atthe end ofeach workday, remove empty can, rags, rubbish and other discarded paint and contractor material from the site. Clean glass and other paint -splattered surfaces upon completion of painting, Remove spattered paint byscraping and washing, using care not to scratch or damage finished surface. Protection Protect all surfaces, whether to be painted or not from damage by painting making sure that all wall, ground and other surfaces are protected from oveop,ay, drips, splatters, etc Correct all damage by cleaning, repairing, o, replacing and repainting' as acceptable tothe owner. Set up temporary protective fencing as needed for the protection of work areas before, during, and after painting operations. City of Yakima Small Works — Invitation to Quote 22621S Page aof4s QUOTEFORM CONTRACTOR TO FILL OUT THIS SECTION Contractor Recommended ProcesslMaterials if Different Then Specifications: Additional f0oterialslLabor Required: ~ Number of Days mComplete Work: Comments: Quote isFirm for Days (Minimum of3ODays) Guarantee: (Minimum q/one (1) year onwork) Warranty* (Minimum One (]) years onmaterials) Delivery Terms � All materials are tobequoted F.O.8.destination. All anticipated shipping costs necessary to meet the delivery schedule must be included. Noadditional charges for shipping orhandling will beallowed. Item Description All labor and materials mopaint (n,qp,prime and finish) administrative building, two waiting shelters . and bathroom roofs (topside only) Qty- approximately 4monnVE OPTION All labor and materials topaint (p,pp prime and finish) clock tower roof (topside only) Unit Type sr Price per Unit TOTAL: ' Total Price (without tax) Tax8.5%: City of Yakima Small Works — Invitation to Quote 22621S Page 4 of«s QUOTE FORM In signing this Quote we certify that we have not, either directly or indirectly, entered into any agreement or participated in any collusion or otherwise taken any action in restraint of free competition; that no attempt has been made to induce any other person or firm to submit or not to submit a Quote; that this Quote has been independently arrived at without collusion with any other Bidder, competitor or potential competitor; that this Quote has not been knowingly disclosed prior to the opening of Quote to any other Bidder or competitor; that the above statement is accurate under penalty of perjury. We will comply with all terms, conditions and specifications required by the City of Yakima in this Invitation to Quote and all terms of our Quote. Company Name Company Address Name of Authorized Company Representative (Type or Print) Title Signature of Above Email Address WMBE/DBE Vendor Certification Number (if applicable) Phone Number ❑ I hereby acknowledge receiving Addendum (a) (Use as many spaces as addenda received.) City of Yakima Small Works — Invitation to Quote 226215 Page 5 of 45 CITY QfYAK|MALIMITED PUBLIC WORKS INVITATION TOQUOTE #2-2621S GENERAUSPECIAL INSTRUCTIONS A. Federal Funding Grant funds are being used for this contrpct. On the basis of the federal funding that may be part ofthe funding for the goods and services provided by the Contractor under the Agreement, and to assure compliance with all federal regulations associated with services compensated with federal funds, in addition to the terms of the primary Agreement, upon notification and instruction by the ordering department, the Contractor must also comply with the specific provisions [FRIUO'which isfully incorporated herein, see attachment A. If there is any conflict between the terms expressed in the primary Agreement and those set forth in 2 CFR 2O{lthe terrnsand conditions ofZCFR20]shall prevail. B. Additional Work Contractor shall supply all labor and materials required for repairs and repainting. All materials not specifically called out but required tocomplete the Work shall be supplied as part of the contract quote price and listed on Quote Form under "Contractor's Recommended Process/Materials" section. Any additional work found necessary that is not specified in the Scope of Work shall also be listed on the Quote Form under "Additional Materials/Labor Required". C. Estimated Quantities Estimated quantities, if any, set forth in the Scope of Work are estimates only, being given only as a basis for the comparison of Quotes. The City does not warrant, expressly orbyimplication; that the actual amount of work will correspond to the estimated quantities. Bidder is responsible for verification of square footage and units ofmeasure, which are tobe provided with Quote submittal. The bidder must determine, from careful examination, the methods, materials, labor and equipment required to perform the work in full and shall reflect the same in his quote price. If, in the performance of the work, additional materials, labor orequipment are required beyond those anticipated by the bidder' they will not be entitled tnadditional compensation except as maybe provided for elsewhere in these specifications, D. Site and Specification Examination The submission of a quote shall be conclusive evidence that a bidder has made sufficient examination of the specifications and contract documents and has thoroughly investigated and is satisfied astnthe existing conditions to be encountered at the site; the character, quantity, quality and scope ofwork; the quantities and qualities of materials to be supplied and equipment and labor to be used; and the requirements of the Contract and proposal submitted, including all addenda for performance ofthe work, E. Mobilization and Demobilization Mobilization shall be included in the base unit price for each work order and shall consist of preparatory work and operations performed by Contractor, including his personnel, equipment, supplies and incidentals to the project site. No separate measurement or payment will be made for custs associated with mobilization and demobilization. F. Qualified Quotes The General and Special Instructions included inthis quote document and in the resulting contract will govern the performance of the work. No other terms and conditions will be accepted. Quotes that are conditioned in any way, or Quotes thattake exception in any way to the City of Yakima's General and Special Terms and Conditions, may result in the Quote being considered non -responsive. City mYakima smanWorks — Invitation mQuote zzsz1S Page or+*s G. Proprietary Material Submitted Any information contained in the bid submitted that is proprietary must be clearly designated. Marking the entire bid as proprietary will be neither accepted nor honored. If a request is made to view a Contractor's bid, the City of Yakima will comply according to the Public Records Act, Chapter 42.56 RCW. If any information is marked as proprietary in the proposal, such information may not be made available until the affected bidder has been given an opportunity to seek a court injunction against the requested disclosure. H. Award of Quote The City of Yakima reserves the right to reject any or all quotes or accept any presented which meet or exceed these specifications, and which would be in the best interest of the City and will not necessarily be bound to accept the low quote. Business License, Permits and Fees All bidders shall have a valid and current business license issued by the State of WA Department of Revenue, Business Licensing Service covering this type of work. Contractor shall also obtain and provide proof of a current City of Yakima business license endorsement or license, as necessary. It will be the Contractor's responsibility to procure any licenses or permits required to complete the project. The Contractor is responsible for all traffic control and barricades, if applicable. You can contact the Codes Department at (509) 575-6121 or {509) 575-6126 or visit the Codes website at: https://www.yak rnawa,gov/services/codesL for information. Contractor is responsible for filling all Public Work paperwork and any charges or fees associated with the filings. All filing fees and charges shall be included in the project's lump sum. Regulations and Codes The following submittals and code compliance shall be required: 1. To the extent applicable, all equipment or materials shall comply with Washington State vehicle regulations, Federal regulations, OSHA and WISHA requirements, to include EPA standards and City safety codes, 2. Compliance with all State and Local building codes: Yakima County Clean Air Authority regulations, Yakima County Landfill, Washington State Department of Labor and Industries & Uniform Building Code (UBC). In addition, the contractor shall ensure that any subcontractor performing this contract shall comply with all applicable laws and regulations pertaining to this contract, Additionally, the Contractor agrees to comply, as applicable with the following: 1. SB 5974 Move Ahead Washington 2, RCE 70A.02 Healthy Environmental for all (HEAL) ACT, and 3. RCW 70A. 65.260 Climate Commitment ACT. K. Labor Provisions ® Overtime Requirements No Contractor or subcontractor contracting for any part of the Project work which may require or involve the employment of laborers or mechanics shall require or permit any such laborer or mechanic in any workweek in which he or she is employed on such work, to work in excess of forty (40) hours in such workweek unless such laborer or mechanicreceived compensation at a rate not less than one and one-half times the basic rate of pay for all hours worked in excess of forty (40) hours in such workweek. Contractor will comply with all applicable provisions of Title 49 RCW, Labor Regulations. Best Modern Practices All work, including design, shall be performed and completed in accordance with the best modern practices, further, no detail necessary for safe and regular operation shall be omitted, although specific mention thereof may not be made in these specifications. City of Yakima Small Works — Invitation to Quote 22621E Page 7 of 45 M. Workmanship Contractor warrants and guarantees to the City that the work shall be performed in a manner consistent with industry standards for the performance of construction and services of a similar nature. The Contractor warrants to the City that materials and equipment furnished will be of good quality and new, that the work will be free from defects, will be fully compatible with the existing materials and equipment and that the work will conform to all requirements. Work not conforming to these requirements, including substitutions (if allowed) not properly approved and authorized, may be considered defective. The Contractor shall comply with recognized workmanship quality standards within the industry as applicable to each unit of work. All references to standards whether for materials, processes, assemblies, workmanship, performance, or similar purpose shall mean, unless otherwise noted, the most recent available published version of such standard. When reference is made to standards, the standards are to be made a part of this contract, and to have the same effect as if fully reproduced herein. It is a requirement that each category of trades person or installer performing the work be qualified, to the extent of being familiar with applicable and recognized quality standards for that category of work, and being capable of workmanship complying with those standards. N. New and Unused All units, equipment, parts and material shall be new, unused, manufacturer's current model year and in current production. All materials shall have physical and chemical properties to withstand the intended service. Equipment design shall have sufficient excess capacity for durability and safety. O. Equal/Approved Equal These specifications are intended to be precise where a specific make, model or trade name is requested. Whenever a make, model or trade name is used, it shall be that or equal, or approved equal. Equal or approved equal means that the make, model or trade name will be given consideration if they fulfill the same performance requirements. The City reserves the right to make the decision on acceptability. Each bidder shall clearly identify make, model or trade name of equipment bid on the face of their quote. Any equipment proposed as an equal to that herein specified must be substantiated with supporting data to justify such request for substitution. P. Contractor's Use of Premises • Do not unreasonably encumber the site with materials or equipment. • Assume full responsibility for protection and safekeeping of products stored on premises. • Provide and install construction barriers and safety signage as necessary. • The contractor shall take necessary precautions to prevent damage to existing structures. Q. Contractor's Responsibility for Fire Prevention and Protection • The Contractor shall perform all work in a fire -safe manner. • Contractor shall supply and maintain on the site adequate fire -fighting equipment capable of extinguishing incipient fires. • Contractor shall comply with applicable Federal, local, and State fire -prevention regulations. Where these regulations do not apply, applicable parts of the National Fire Prevention Standard for Safeguarding building Construction Operations (NFPA No. 241) shall be followed. R. Hazardous Materials If asbestos or other hazardous materials are discovered during performance of work under this project, Contractor will immediately notify the Project Coordinator, so that a Change Order addressing Pollution Control as well as any change in cost may be executed by Purchasing. S. No Disturbance The Contractor shall not disturb grounds or materials outside the sphere of the contracted project. City of Yakima Small Works — Invitation to Quote 22621S Page 8 of 45 T. Protection of Utilities The Contractor shall protect from damage public and private utilities encountered during the work. Prior to beginning work, the Contractor shall give proper notification as required by RCW 19.122.030 to the agencies that have utilities in place, and shall cooperate with these agencies in the protection and relocation of underground utilities, facilities and structures. The number to call is tt811. U. Waste Materials All refuse and waste material must be collected and disposed of, in a legal manner, by the Contractor off the City's property, at the Contractor's expense. The Contractor must immediately clean up any spilled material from streets, roads, etc. Storage of debris on site is not allowed. V. Dust/Debris Control The Contractor must take whatever steps, procedures or means as are required to prevent abnormal dust and debris conditions being caused by the operation in connection with the work. Dust control must be incidental to this project. W. Contractor's Vehicles Contractor and employee vehicles, and all other vehicles entering Owner's property to perform work, must use an access route approved by the Owner. All such vehicles will not be allowed to park on the transit facility and must park in a designated parking area approved by the owner as to not interrupt or restrict facility usage by transit vehicles, staff or patrons and/or transit activities and services. X. Repair or Replacement The work shall consist of repair of any incidental damages to walls, moldings, electrical, flooring, landscaping, fencing, paved areas, top soil, turf, or other miscellaneous items within or adjacent to the project area. This includes complete replacement of items that are beyond repair as determined by the City. Should adjacent property be damaged in any manner, Contractor shall immediately contact the Project Coordinator. Contractor shall promptly repair damages caused to adjacent areas, rooms, facilities, property, streets, and sidewalks by construction operations as directed by the City and at no cost to the City. Y. Final Inspection and Acceptance When the Contractor considers the work physically complete and ready for final inspection, the Contractor shall request the City's Project Coordinator to inspect the work. The City will notify the Contractor of any deficiencies in the work after inspection. The Contractor shall immediately take such corrective measures as are necessary to remedy the listed deficiencies. Corrective work shall be pursued vigorously, diligently, and without interruption until physical completion of the listed deficiencies. This process will continue until the City is satisfied the listed deficiencies have been corrected. If action to correct the listed deficiencies is not initiated within seven (7) days after receipt of the written notice listing the deficiencies, the City may, upon written notice to the Contractor, take whatever steps are necessary to correct those deficiencies. The date of final acceptance shall be determined by the date the Contractor has properly invoiced the City for payment and turned in all required submittals after the final inspection and acceptance has occurred. Z. Payments Upon final inspection and acceptance of the work by the City, the Contractor is to submit properly completed invoice(s) to the City of Yakima Accounts Payable, 129 North 2nd Street, Yakima, WA 98901. To City of Yakima Small Works — Invitation to Quote 226215 Page 9 of 45 insure prompt payment each invoice should cite Quote number, purchase ordernumber, discount terms and include the Contractor's name and return remittance address. In addition, the invoice shall include quote item description, quantity, unit price, total price, location of work and date work completed. Payment will be mailed within thirty (30) days of acceptance of the completed project, post -work submittals, Prevailing Wage Intents and Affidavits, and a properly completed invoice. Invoice shall be itemized to reflect hours worked and material costs. AA. Retmimaga(Must bewithheld ot2O%/norder towaive performancelpayment bonds) The City ofYakima shall have the right towithhold ten percent (1O36) pfthe amount ofany invoice submitted to the City of Yakima by the Contractor for labor, supervision, and materials furnished by the Contractor up tothe time ofcompletion and acceptance ofjob. Each invoice submitted by the Contractor shall include two separate line items. The first line item is to reflect the total price of the job being invoiced, less ten percent (10%) retainage. The second line item will reflect the ten percent (10%) retainage. Payment of said retainage shall be due thirty (30) days after City of Yakima's acceptance ofcompleted work and verification ofPrevailing Wage filings with Labor and Industries. City ofYammammanwnrks—|nvitativnto Quntez26z1S Page xoof4s ATTACHMENT A — Federal. Funding Requirements When spending Federal Funding, the City complies with and has a separate policy for "Uniform Administrative Requirement, Cost Principals, and Audit Requirements for Federal Awards", published in Title 2 of the Code of Federal Regulations, (2 CFR 200), specifically 2 CFR 200.318 through 200.326. 2 CFR 200 Procurement Standards for when utilizing Federal Funds (Adapted for City of Yakima use to comply with 200.318 through 200.326) 200.318 General procurement standards. 200.319 Competition. 200.320 Methods of procurement to be followed. 200.321 Contracting with small and minority businesses, women's business enterprises, and labor surplus area firms. 200,322 Procurement of recovered materials. 200.323 Contract cost and price. 200.324 Federal awarding agency or pass -through entity review. 200.325 Bonding requirements. 200.326 Contract provisions. General procurement standards. (Adapted from §200.318) A. Conform to Federal Law: The City uses its own documented procurement procedures which reflect applicable State, local, laws and regulations, providing for procurements that conform to applicable Federal law and the standards identified in these Procurement Standards. B. Oversight: City Attorney shall maintain oversight when procuring Equipment, Materials, Services and Limited Public Works, to ensure that contractors perform in accordance with the terms, conditions, and specifications of their contracts or purchase orders. C. Conflict of Interest: City maintains written standards of conduct covering conflicts of interest and governing the actions of its employees engaged in the selection, award and administration of contracts in the City. In addition, no employee, officer, or agent may participate in the selection, award, or administration of a contract supported by a Federal award if he or she has a real or apparent conflict of interest. Such a conflict of interest would arise when the employee, officer, or agent, any member of his or her immediate family, his or her partner, or an organization which employs or is about to employ any of the parties indicated herein, has a financial or other interest in or a tangible personal benefit from a firm considered for a contract. The officers, employees, and agents of the City may neither solicit nor accept gratuities, favors, or anything of monetary value from contractors or parties to subcontracts. D. Organizational Conflicts of Interest: If the City has a parent, affiliate, or subsidiary organization that is not a state, local government, or Indian tribe, the City maintains written standards of conduct covering organizational conflicts of interest. Organizational conflicts of City of Yakima Small Works — Invitation to Quote 22621S Page 24 of 45 interest means that because of relationships with a parent company, affiliate, or subsidiary organization, the City entity is unable or appears to be unable to be impartial in conducting a procurement action involving a related organization. E. Most Economical Approach: The City must avoid acquisition of unnecessary or duplicative items. Consideration should be given to consolidating or breaking out procurements to obtain a more economical purchase. Where appropriate, an analysis will be made of lease versus purchase alternatives, and any other appropriate analysis to determine the most economical approach. F. Intergovernmental Procurements: To foster greater economy and efficiency, and in accordance with efforts to promote cost-effective use of shared services across the Federal Government, the City is encouraged to enter into state and local intergovernmental agreements or inter -entity agreements where appropriate for procurement or use of common or shared goods and services. G. Federal Surplus: The City is encouraged to use Federal excess and surplus property in lieu of purchasing new equipment and property whenever such use is feasible and reduces project costs. H. Value Engineering: The City is encouraged to use value engineering clauses in contracts for construction projects of sufficient size to offer reasonable opportunities for cost reductions. Value engineering is a systematic and creative analysis of each contract item or task to ensure that its essential function is provided at the overall lower cost. Responsible Contractor: The City must award contracts only to responsible contractors possessing the ability to perform successfully under the terms and conditions of a proposed procurement. Consideration will be given to such matters as contractor integrity, compliance with public policy, record of past performance, and financial and technical resources. See also § 200.213 Suspension and debarment. J. Records: The City must maintain records sufficient to detail the history of procurement. These records will include, but are not necessarily limited to the following: rationale for the method of procurement, selection of contract type, contractor selection or rejection, and the basis for the contract price. K. Time and Materials Contracts: The City entity may use a time and materials type contract only after a determination that no other contract is suitable and if the contract includes a ceiling price that the contractor exceeds at its own risk. Time and materials type contract means a contract whose cost to a City is the sum of: i. The actual cost of materials; and ii. Direct labor hours charged at fixed hourly rates that reflect wages, general and administrative expenses, and profit. L. Ceiling Price: Since this formula generates an open-ended contract price, a time -and - materials contract provides no positive profit incentive to the contractor for cost control or labor City of Yakima Small Works — Invitation to Quote 22621S Page 25 of 4S efficiency. Therefore, each contract must set a ceiling price that the contractor exceeds at its own risk. Further, the City awarding such a contract must assert a high degree of oversight in order to obtain reasonable assurance that the contractor is using efficient methods and effective cost controls. M. Issues: The City alone must be responsible, in accordance with good administrative practice and sound business judgment, for the settlement of all contractual and administrative issues arising out of procurements. These issues include, but are not limited to, source evaluation, protests, disputes, and claims. These standards do not relieve the City of any contractual responsibilities under its contracts. The Federal awarding agency will not substitute its judgment for that of the City unless the matter is primarily a Federal concern. Violations of law will be referred to the local, state, or Federal authority having proper jurisdiction. [78FR 78608, Dec. 26, 2013, as amended at 79 FR 75885, Dec. 19, 2014; 80 FR 43309, July 22, 20151 2. Competition. (Adapted from § 200.319) A. Full and Open Competition: All procurement transactions must be conducted in a manner providing full and open competition consistent with the standards of this section. In order to ensure objective contractor performance and eliminate unfair competitive advantage, contractors that develop or draft specifications, requirements, statements of work, or invitations for bids or requests for proposals must be excluded from competing for such procurements. Some of the situations considered to be restrictive of competition include but are not limited to: B. Unreasonable Requirements: Placing unreasonable requirements on firms in order for them to qualify to do business; C. Unnecessary Experience and Bonding: Requiring unnecessary experience and excessive bonding; D. Noncompetitive Pricing: Noncompetitive pricing practices between firms or between affiliated companies; E. Noncompetitive Contracts: Noncompetitive contracts to consultants that are on retainer contracts; F. Organizational conflicts of interest: G. Brand Name: Specifying only a "brand name" product instead of allowing an equal" product to be offered and describing the performance or other relevant requirements of the procurement; and H. Arbitrary Actions: Any arbitrary action in the procurement process. 1. Geographical Preferences: The City will conduct procurements in a manner that prohibits the use of statutorily or administratively imposed state, local, or tribal geographical preferences in the evaluation of bids or proposals, except in those cases where applicable Federal statutes expressly mandate or encourage geographic preference. Nothing in this section preempts City of Yakima Small Works — Invitation to Quote 226215 Page 26 of 45 state licensing laws. When contracting for architectural and engineering (NE) services, geographic location may be a selection criterion provided its application leaves an appropriate number of qualified firms, given the nature and size of the project, to compete for the contract. The City ensures that all solicitations: i. Incorporate a clear and accurate description of the technical requirements for the material, product, or service to be procured. Such description must not, in competitive procurements, contain features which unduly restrict competition. The description may include a statement of the qualitative nature of the material, product or service to be procured and, when necessary, must set forth those minimum essential characteristics and standards to which it must conform if it is to satisfy its intended use. Detailed product specifications should be avoided if at all possible. When it is impractical or uneconomical to make a clear and accurate description of the technical requirements, a "brand name or equivalent" description may be used as a means to define the performance or other salient requirements of procurement. The specific features of the named brand which must be met by offers must be clearly stated; and Identify all requirements which the offerors must fulfill and all other factors to be used in evaluating bids or proposals. iii. The City ensures that all prequalified lists of persons, firms, or products which are used in acquiring goods and services are current and include enough qualified sources to ensure maximum open and free competition. Also, the City must not preclude potential bidders from qualifying during the solicitation period. [78 FR 78608, Dec, 26, 2013, as amended at 79 FR 75885, Dec. 19, 2014] 1 Methods of procurement to be followed.. (Adapted from § 200.320 ) The City must use one of the following methods of procurement. A. Procurement by micro -purchases. Procurement by micro -purchase is the acquisition of supplies or services, the aggregate dollar amount of which does not exceed the micro - purchase threshold (§ 200.67 Micro -purchase). To the extent practicable, the City must distribute micro -purchases equitably among qualified suppliers. Micro -purchases may be awarded without soliciting competitive quotations if the City considers the price to be reasonable. B. Procurement by small purchase procedures. Small purchase procedures are those relatively simple and informal procurement methods for securing services, supplies, or other property that do not cost more than the Simplified Acquisition Threshold. If small purchase procedures are used, price or rate quotations must be obtained from an adequate number of qualified sources. C. Procurement by sealed bids (formal advertising). Bids are publicly solicited and a firm fixed price contract (lump sum or unit price) is awarded to the responsible bidder whose bid, conforming with all the material terms and conditions of the invitation for bids, is the lowest City of Yakima Small Works — Invitation to Quote 226215 Page 27 of 45 in price. The sealed bid method is the preferred method for procuring construction, if the conditions in paragraph (J)(i) of this section apply. i. In order for sealed bidding to be feasible, the following conditions should be present: 1) A complete, adequate, and realistic specification or purchase description is available; 2) Two or more responsible bidders are willing and able to compete effectively for the business; and 3) The procurement lends itself to a firm fixed price contract and the selection of the successful bidder can be made principally on the basis of price. 4) If sealed bids are used, the following requirements apply: a) Bids must be solicited from an adequate number of known suppliers, providing them sufficient response time prior to the date set for opening the bids (11 days for the City in 2 issues and 13 days for the County in 2 issues). The invitation for bids must be publicly advertised; b) The invitation for bids, which will include any specifications and pertinent attachments, must define the items or services in order for the bidder to properly respond; c) All bids will be opened at the time and place prescribed in the invitation for bids, and opened publicly; d) A firm fixed price contract award will be made in writing to the lowest responsive and responsible bidder. Where specified in bidding documents, factors such as discounts, transportation cost, and life cycle costs must be considered in determining which bid is lowest. Payment discounts will only be used to determine the low bid when prior experience indicates that such discounts are usually taken advantage of; and e) Any or all bids may be rejected if there is a sound documented reason. D. Procurement bv competitive proposals. The technique of competitive proposals is normally conducted with more than one source submitting an offer, and either a fixed price or cost - reimbursement type contract is awarded. It is generally used when conditions are not appropriate for the use of sealed bids. If this method is used, the following requirements apply: i. Requests for proposals must be publicized and identify all evaluation factors and their relative importance. Any response to publicized requests for proposals must be considered to the maximum extent practical; ii. Proposals must be solicited from an adequate number of qualified sources; City of Yakima Small Works — Invitation to Quote 22621S Page 28 of 45 iii. The City must have a written method for conducting technical evaluations of the proposals received and for selecting recipients; Contracts must be awarded to the responsible firm whose proposal is most advantageous to the program, with price and other factors considered; and v. The City may use competitive proposal procedures for qualifications -based procurement of architectural/engineering (A/E) professional services whereby competitors' qualifications are evaluated and the most qualified competitor is selected, subject to negotiation of fair and reasonable compensation. The method, where price is not used as a selection factor, can only be used in procurement of AYE professional services. It cannot be used to purchase other types of services though AYE firms are a potential source to perform the proposed effort. vi. Procurement by noncompetitive proposals. Procurement by noncompetitive proposals is procurement through solicitation of a proposal from only one source and may be used only when one or more of the following circumstances apply: 1) The item is available only from a single source; 2) The public exigency or emergency for the requirement will not permit a delay resulting from competitive solicitation; 3) The Federal awarding agency or pass -through entity expressly authorizes noncompetitive proposals in response to a written request from the City; or 4) After solicitation of a number of sources, competition is determined inadequate. 178 FR 78608, Dec. 26, 2013, as amended at 79 FR 75885, Dec. 19, 29`i4; 80 FR 54409 10, 2015] 4, Contracting with small and minority businesses, women's business enterprises, and labor surplus area firms. (Adapted from § 200.321) A. The City must take all necessary affirmative steps to assure that minority businesses, women's business enterprises, and labor surplus area firms are used when possible. B. Affirmative steps must include: Placing qualified small and minority businesses and women's business enterprises on solicitation lists (forward requests to Purchasing); Assuring that small and minority businesses, and women's business enterprises are solicited whenever they are potential sources. Log onto WWW.MDT.MT.GOV and search their database for any potential vendors. Click on "Doing Business"; City of Yakima Small Works —Invitation to Quote 226215 Page 29 of 45 iii. Dividing total requirements, when economically feasible, into smaller tasks or quantities to permit maximum participation by small and minority businesses, and women's business enterprises; v. Establishing delivery schedules, where the requirement permits, which encourage participation by small and minority businesses, and women's business enterprises; v. Using the services and assistance, as appropriate, of such organizations as the Small Business Administration and the Minority Business Development Agency of the Department of Commerce, and Office of Minority & Women's Business Enterprises; and vi. Requiring the prime contractor, if subcontracts are to be le steps listed in paragraphs (i) through (ii) of this section. 0 ake the affirmative 6. Procurement of recovered materials. (Adapted from § 200.322 ) The City must comply with section 6002 of the Solid Waste Disposal Act, as amended by the Resource Conservation and Recovery Act. The requirements of Section 6002 include procuring only items designated in guidelines of the Environmental Protection Agency (EPA) at 40 CFR part 247 that contain the highest percentage of recovered materials practicable, consistent with maintaining a satisfactory level of competition, where the purchase price of the item exceeds $10,000 or the value of the quantity acquired during the preceding fiscal year exceeded $10,000; procuring solid waste management services in a manner that maximizes energy and resource recovery; and establishing an affirmative procurement program for procurement of recovered materials identified in the EPA guidelines. [78 FR 78608, Dec, 26, 2018, as amended at 79 FR 7588 , Dec, 19, 2014] 6. Contract cost and price. (Adapted from § 200.323) A. The City must perform a cost or price analysis in connection with every procurement action in excess of the Simplified Acquisition Threshold including contract modifications. The method and degree of analysis is dependent on the facts surrounding the particular procurement situation, but as a starting point, the City must make independent estimates before receiving bids or proposals. B. The City must negotiate profit as a separate element of the price for each contract in which there is no price competition and in all cases where cost analysis is performed. To establish a fair and reasonable profit, consideration must be given to the complexity of the work to be performed, the risk borne by the contractor, the contractor's investment, the amount of subcontracting, the quality of its record of past performance, and industry profit rates in the surrounding geographical area for similar work. C. Costs or prices based on estimated costs for contracts under the Federal award are allowable only to the extent that costs incurred or cost estimates included in negotiated prices would be allowable for the City. The City may reference its own cost principles that comply with the Federal cost principles. City of Yakima Small Works — Invitation to Quote 226215 Page 30 of 45 D. The cost plus a percentage of cost and percentage of construction cost methods of contracting must not be used. 7. Federal awarding agency or pass -through entity review. (Adapted from § 200.324) A. The City must make available, upon request of the Federal awarding agency or pass -through entity, technical specifications on proposed procurements where the Federal awarding agency or pass -through entity believes such review is needed to ensure that the item or service specified is the one being proposed for acquisition. This review generally will take place prior to the time the specification is incorporated into a solicitation document. However, if the City desires to have the review accomplished after a solicitation has been developed, the Federal awarding agency or pass -through entity may still review the specifications, with such review usually limited to the technical aspects of the proposed purchase. B. The City must make available upon request, for the Federal awarding agency or pass - through entity pre -procurement review, procurement documents, such as requests for proposals or invitations for bids, or independent cost estimates, when: i. The City's procurement procedures or operation fails to comply with the procurement standards in this part; ii. The procurement is expected to exceed the Simplified Acquisition Threshold and is to be awarded without competition or only one bid or offer is received in response to a solicitation; iii. The procurement, which is expected to exceed the Simplified Acquisition Threshold, specifies a "brand name" product; iv. The proposed contract is more than the Simplified Acquisition Threshold and is to be awarded to other than the apparent low bidder under a sealed bid procurement; or v. A proposed contract modification changes the scope of a contract or increases the contract amount by more than the Simplified Acquisition Threshold. C. The City is exempt from the pre -procurement review in paragraph (ii) of this section if the Federal awarding agency or pass -through entity determines that its procurement systems comply with the standards of this part. D. The City may request that its procurement system be reviewed by the Federal awarding agency or pass -through entity to determine whether its system meets these standards in order for its system to be certified. Generally, these reviews must occur where there is continuous high -dollar funding, and third party contracts are awarded on a regular basis; E. The City may self -certify its procurement system. Such self -certification must not limit the Federal awarding agency's right to survey the system. Under a self -certification procedure, the Federal awarding agency may rely on written assurances from the City that it is complying with these standards. The City must cite specific policies, procedures, regulations, or City of Yakima Small Works — Invitation to Quote 22621S Page 31 of 45 standards as being in compliance with these requirements and have its system available for review. 8. Bonding requirements. (Adapted from § 200.325) For construction or facility improvement contracts or subcontracts exceeding the Simplified Acquisition Threshold, the Federal awarding agency or pass -through entity may accept the bonding policy and requirements of the City provided that the Federal awarding agency or pass -through entity has made a determination that the Federal interest is adequately protected. If such a determination has not been made, the minimum requirements must be as follows: A. A bid guarantee from each bidder equivalent to five percent of the bid price. The "bid guarantee" must consist of a firm commitment such as a bid bond, certified check, or other negotiable instrument accompanying a bid as assurance that the bidder will, upon acceptance of the bid, execute such contractual documents as may be required within the time specified. B. A performance bond on the part of the contractor for 100 percent of the contract price. A "performance bond" is one executed in connection with a contract to secure fulfillment of all the contractor's obligations under such contract. C. A payment bond on the part of the contractor for 100 percent of the contract price. A "payment bond" is one executed in connection with a contract to assure payment as required by law of all persons supplying labor and material in the execution of the work provided for in the contract. 9. Federal Contract provisions. (Adapted from § 200.326) Simplified Acquisition Threshold raised to $250,000; However, FTA is still set at $150,000 for Buy American. The City's contracts utilizing Federal Funding must contain the applicable provisions described in Appendix 11 to Part 200—Contract Provisions for City Contracts Under Federal Awards, which can be viewed and copied at: ht r'ifederal.elaws,uslcfrltitle2.chapt+✓rii.part2Q0ta Appendix II to Part 200—Contract Provisions for Non -Federal Entity Contracts Under Federal Awards In addition to other provisions required by the Federal agency or non -Federal entity, all contracts made by the non -Federal entity under the Federal award must contain provisions covering the following, as applicable. (A) Contracts for more than the simplified acquisition threshold, which is the inflation adjusted amount determined by the Civilian Agency Acquisition Council and the Defense Acquisition Regulations Council (Councils) as authorized by 41 U.S.C. 1908, must address administrative, contractual, or legal remedies in instances where contractors violate or breach contract terms, and provide for such sanctions and penalties as appropriate. (B) All contracts in excess of $10,000 must address termination for cause and for convenience by the non -Federal entity including the manner by which it will be effected and the basis for settlement. (C) Equal Employment Opportunity. Except as otherwise provided under 41 CFR Part 60, all contracts that meet the definition of "federally assisted construction contract" in 41 CFR Part 60-1.3 must include the equal opportunity clause provided under 41 CFR 60-1.4 `b , in accordance with Executive Order 11246, "Equal Employment, Opportunity" (30 FR 12319, 12935, 3 CFR Part, 1964- City of Yakima Small Works — Invitation to Quote 226215 Page 32 of 45 1965 Comp., p. 339), as amended by Executive Order 11375, "Amending ExecutiveOrder 11246 Relating to Equal Employment Opportunity," and implementing regulations at 41 CFR part 60, °Office of Federal Contract Compliance Programs, Equal Employment Opportunity, Department of Labor.' (D) Davis -Bacon Act, as amended (40 U.S.C. 3141-3148). When required by Federal program legislation, all prime construction contracts in excess of $2,000 awarded by non -Federal entities must include a provision for compliance with the Davis -Bacon Act (40 U.S.C. 3141-3144, and 3146- 3148) as supplemented by Department of Labor regulations (29 CFR Part 5, "Labor Standards Provisions Applicable to Contracts Covering Federally Financed and Assisted Construction")„ In accordance with the statute, contractors must be required to pay wages to laborers and mechanics at a rate not less than the prevailing wages specified in a wage determination made by the Secretary of Labor. In addition, contractors must be required to pay wages not less than once a week. The non -Federal entity must place a copy of the current prevailing wage determination issued by the Department of Labor in each solicitation. The decision to award a contract or subcontract must be conditioned upon the acceptance of the wage determination. The non -Federal entity must report all suspected or reported violations to the Federal awarding agency. The contracts must also include a provision for compliance with the Copeland "Anti -Kickback" Act (40 U.S.C. 3145), as supplemented by Department of Labor regulations (29 CFR Part 3, 'Contractors and Subcontractors on Public Building or Public Work Financed in Whole or in Part by Loans or Grants from the United States'). The Act provides that each contractor or subrecipient must be prohibited from inducing. by any means, any person employed in the construction, completion, or repair of public work, to give up any part of the compensation to which he or she is otherwise entitled. The non -Federal entity must report all suspected or reported violations to the Federal awarding agency. (E) Contract Work Hours and Safety Standards Act (40U.S.C. 3701-3708). Where applicable, all contracts awarded by the non -Federal entity in excess of $100,000 that involve the employment of mechanics or laborers rnust include a provision for compliance with 40 U.S.C„ 3702 and 3704, as supplemented by Department of Labor regulations (29 CFR Part 5). Under 40 U,S.C. 3702 of the Act, each contractor must be required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is permissible provided that the worker is compensated at a rate of not less than one and a half times the basic rate of pay for all hours worked in excess of 40 hours in the work week. The requirements of 40 U.S.C. 3704 are applicable to construction work and provide that no laborer or mechanic must be required to work in surroundings or under working conditions which are unsanitary, hazardous or dangerous. These requirements do not apply to the purchases of supplies or materials or articles ordinarily available on the open market, or contracts for transportation or transmission of intelligence. (F) Rights to Inventions Made Under a Contract or Agreement. If the Federal award meets the definition of ''funding agreement" under 37 CFR § 401,2 (a) and the recipient or subrecipient wishes to enter into a contract with a small business firm or nonprofit organization regarding the substitution of parties, assignment or performance of experimental, developmental, or research work under that "funding agreement," the recipient or subrecipient must comply with the requirements of 37 CFR Part 401, "Rights to Inventions Made by Nonprofit Organizations and Small Business Firms Under Government Grants, Contracts and Cooperative Agreements," and any implementing regulations issued by the awarding agency. (G) Clean Air Act (42 U.S.C. 7401-7671g.) and the Federal Water Pollution Control Act (33 U.S.C. 1251-1387), as amended --Contracts and subgrants of amounts in excess of $150,000 must contain a provision that requires the non -Federal award to agree to comply with all applicable standards, orders or regulations issued pursuant to the Clean Air Act (42 U.S.C. 74Q1-7671q) and the Federal Water Pollution Control Act as amended (33 U.S.C. 125-1-1387). Violations must be reported to the Federal awarding agency and the Regional Office of the Environmental Protection Agency (EPA). City of Yakima Small Works Invitation to Quote 226215 Page 33 of 45 (H) Debarment and Suspension (Executive Orders 12549 and 12689)—A contract award (see 2 CFR 180.22Q) must not be made to parties listed on the governmentwide exclusions in the System for Award Management (SAM), in accordance with the OMB guidelines at 2 CFR 180 that implement Executive Orders 12549 (3 CFR part 1986 Comp., p. 189) and 12689 (3 CFR part 1989 Comp., p. 235), "Debarment and Suspension," SAM Exclusions contains the names of parties debarred, suspended, or otherwise excluded by agencies, as well as parties declared ineligible under statutory or regulatory authority other than Executive Order 12549, (I) Byrd Anti -Lobbying Amendment (31 U.S,C. 1352) Contractors that apply or bid for an award exceeding $100,000 must file the required certification. Each tier certifies to the tier above that it will not and has not used Federal appropriated funds to pay any person or organization for influencing or attempting to influence an officer or employee of any agency, a member of Congress, officer or employee of Congress, or an employee of a member of Congress in connection with obtaining any Federal contract, grant or any other award covered by 31 U.S.C. 1352. Each tier must also disclose any lobbying with non -Federal funds that takes place in connection with obtaining any Federal award, Such disclosures are forwarded from tier to tier up to the non -Federal award, (J) See § 200,323, (K) See 200.216. (L) See § 200.322. [78 FR 78608, Dec. 26, 201 , as amended at 79 FR 75888, Dec. 19, 2014; 85 FR 49577, Aug. 13, 2020) FTA Specific 3RD Party Contracting Clauses 'l. Safe Operation of Motor Vehicles — FTA Master Agreement (25) Section 34. As applicable, Contractor must comply with the following provisions: a. Seat Belt Use: The Recipient agrees to implement Executive Order No. 13043, "Increasing Seat Belt Use in the United States," April 16, 1997, 23 U.S.C. § 402 note, (62 Fed. Reg. 19217), by: 90 (1) Adopting and promoting on-the-job seat belt use policies and programs for its employees and other personnel that operate company -owned vehicles, company -rented vehicles, or personally operated vehicles; and (2) Including a "Seat Belt Use" provision in each third party agreement related to the Award. b. Distracted Driving, including. Text Messaging While Driving: The Recipient agrees to comply with: (1) Executive Order No. 13513, "Federal Leadership on Reducing Text Messaging While Driving," October 1, 2009, 23 U.S.C. § 402 note, (74 Fed. Reg. 51225); (2) U.S. DOT Order 3902.10, "Text Messaging While Driving," December 30, 2009; and (3) The following U.S. DOT Special Provision pertaining to Distracted Driving: (i) Safety. The Recipient agrees to adopt and enforce workplace safety policies to decrease crashes caused by distracted drivers, including policies to ban text messaging while using an electronic device supplied by an employer, and driving a vehicle the driver owns or rents, a vehicle Recipient owns, leases, or rents, or a privately -owned vehicle when on official business in connection with the Award, or when performing any work for or on behalf of the Award: (ii) Recipient Size. The Recipient agrees to conduct workplace safety initiatives in a manner commensurate with its size, such as establishing new rules and programs to prohibit text messaging while driving, re-evaluating the existing programs to prohibit text messaging while driving, and providing education, awareness, and other outreach to employees about the safety risks associated with texting while driving; and (iii) Extension of Provision. The Recipient agrees to include the preceding Special Provision of section 34(b)(3)(i) — (ii) of this Master Agreement in its third party agreements, and encourage its Third Party Participants to comply with this Special Provision, and City of Yakima Small Works — Invitation to Quote 22621S Page 34 of 45 include this Special Provision in each third party sub -agreement at each tier supported with federal assistance. 2. Prohibition on Certain Telecommunications and Video Surveillance Services or Equipment Recipients and subrecipients are prohibited from obligating or expending loan or grant funds to (1) procure or obtain; (2) extend or renew a contract to procure or obtain; or (3) enter into a contract (or extend or renew a contract) to procure or obtain equipment, services, or systems that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. As described in Public Law 115-232, section 889, covered telecommunications equipment is telecommunications equipment produced by Huawei Technologies Company or ZTE Corporation (or any subsidiary or affiliate of such entities). a. For the purpose of public safety, security of government facilities, physical security surveillance of critical infrastructure, and other national security purposes, video surveillance and telecommunications equipment produced by Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, or Dahua Technology Company (or any subsidiary or affiliate of such entities). b. Telecommunications or video surveillance services provided by such entities or using such equipment. c. Telecommunications or video surveillance equipment or services produced or provided by an entity that the Secretary of Defense, in consultation with the Director of the National Intelligence or the Director of the Federal Bureau of Investigation, reasonably believes to be an entity owned or controlled by, or otherwise connected to, the government of a covered foreign country. In implementing the prohibition under Public Law 115-232, section 889, subsection (f), paragraph (1), heads of executive agencies administering loan, grant, or subsidy programs shall prioritize available funding and technical support to assist affected businesses, institutions and organizations as is reasonably necessary for those affected entities to transition from covered communications equipment and services, to procure replacement equipment and services, and to ensure that communications service to users and customers is sustained. 3. Notice to FTA and U.S. DOT Inspector General — FTA Master Agreement (28) Section 39(b) If a current or prospective legal matter that may affect the Federal Government emerges, the Contractor must promptly notify the Owner, the FTA Chief Counsel and FTA Regional Counsel for the Region in which Owner is located in accordance to the FTA Master Agreement (28) Section 39(b). The Contractor must include a similar notification requirement in its Third Party Agreements and must require each Third Party Participant to include an equivalent provision in its sub -agreements at every tier, for any agreement that is a "covered transaction" according to 2 C.F.R. §§ 180.220 and 1200.220. a. The types of legal matters that require notification include, but are not limited to, a major dispute, breach, default, litigation, or naming the Federal Government as a party to litigation or a legal disagreement in any forum for any reason. City of Yakima Small Works — Invitation to Quote 22621S Page 35 of 45 b. Matters that may affect the Federal Government include, but are not limited to, the Federal Government's interests in the Award, the accompanying Underlying Agreement, and any Amendments thereto, or the Federal Government's administration or enforcement of federal laws, regulations, and requirements. c. Additional Notice to U.S. DOT Inspector General. The Contractor must promptly notify the Owner and U.S. DOT Inspector General in addition to the FTA Chief Counsel or Regional Counsel for the Region in which the Recipient is located, if the Contractor has knowledge of potential fraud, waste, or abuse occurring on a Project receiving assistance from FTA. The notification provision applies if a person has or may have submitted a false claim under the False Claims Act, 31 U.S.C. § 3729, et seq., or has or may have committed a criminal or civil violation of law pertaining to such matters as fraud, conflict of interest, bid rigging, misappropriation or embezzlement, bribery, gratuity, or similar misconduct involving federal assistance. This responsibility occurs whether the Project is subject to this Agreement or another agreement between the Contractors and Owner that includes FTA funds, or an agreement involving a principal, officer, employee, agent, or Third Party Participant of the Contractor or Owner. It also applies to subcontractors at any tier. Knowledge, as used in this paragraph, includes, but is not limited to, knowledge of a criminal or civil investigation by a Federal, state, or local law enforcement or other investigative agency, a criminal indictment or civil complaint, or probable cause that could support a criminal indictment, or any other credible information in the possession of the Contractor. In this paragraph, "promptly" means to refer information without delay and without change. This notification provision applies to all divisions of the Contractor, including divisions tasked with law enforcement or investigatory functions. City of Yakima Small Works — Invitation to Quote 226215 Page 36 of 45 ATTACHMENT C — Extra Muscle"' Pre -paint Cleaner Data Sheet • Extra Heavy Duty • Clean Tough Dirt - Fast • Improves Coating Adhesion • Biodegradable • Water -Based 1. P' D 'CT DESCRIPTION Extra:. Muscle Prepaint Cleaner is an extra -heavy duty., highly conceruratcd. water.reducible, alkaline detergent blend preferred by painting, and cleaning. professionals for really tough cleaning jobs. It is recommended for heavy duty cleaning before applying a water -'borne ur solvent -borne or sealant. ADVAr T AGES °ta Muscle Prepanu Cleaner dsrlivcrs the increased solvency and high soil loading capacity required to remove heavy, sticky masses of greasy crime, soot. smoketextoa.st residue and paint chalk. Under severe conditions. Extra Muscle !'repaint. Cleaner has proven its ahi'lity to provide ou standing cleaning performance and superior surface bonding characteristics for new co3tine,s. Extra Muscle Prepaint Clw ana r has a ry slight. mild cxlor. When diluted. it virtually odorless and nym- ionable to personnel in the area of use. It cleans rtpldly through a broad range of tctttpatature conditions and requires no unreasonable precautions. by workers. For Cie, Q Heavy E uipment. Motors. Machinery Q Metal Parts & Subassemblies Q Factories and Garages Removes: Q Mill Oil. Forming oil Q Oxidized Paint, Soot. Smoke Residue Q (:)il, Road Film. Stack Stains 3. USES CLEAN NG Prepaint Cleaner for heavy duty cleaning prior to the application of water -home or solvent - home coatings and sealants u seie tended SOLVENT REPLACEMENT - Extra. Muscle Prepaint Cleaner is a very effective water -based replace- ment for chlorinated and pctro1cun solvents in most cleaning and degreasing applications.. REMOVING WATER..BASED CO. TLNGS - Extra Prepaint Cleaner and remove many water-. coatings and opaque stains. To test. spray the concentrate onoa small area and allow 10 minutes contact time. Scrape or brush the surface to remove the old coating. Rinse with a high pressure spray. 4. APPLICATION. Extra Muscle Prepaint Cleaner can be applied with a pressure washer. conventional or airless sprayer. hand -pump :sprayer. hose. end sprayer or manually with a brush. cloth. sponge or fiber pad. GREAT LAKES LABORATORIES OR BEST RES: I) Select proper dilu Dilution Guide). 2) T ion (sec Mix the concentrate ith vv°stet. If available. hot water wilt speed cleaning. Each 18* P in- crease in :solution temperature doubles cleaning e Tectivencss. 3) Apply the mi a low pressure spray. 4) Allow 5-10 minute contact time. on with rinse with hir,h pressure 1 M PORTA'NT: To prevent streaking on vertical surfaces. apply solution from the bottom working upward for the initial wetting of the surface. www.greatlakeslaboratorles.com City of Yakima Small Works — invitation to Quote 22 5 Page 40 of 45 5. DILL O Extra Muscle Prepaint Cleaner is highly concentrated and intended to t*r diluted before use, Dilution rate will vary with surface conditions and application method. The dilution required for a spec"fmc job should tv determined by cleaning a smolt test area. Mix. test solutions. huscd on the foilc7uing: guide and compare the effectiveness of different concentrations, For Conventional, Airless, Hand-PumpSprayer or Manual Us For 1 Ga. of Solution Add: 21,2 at For 5 Gal of Solution Add: ?«I) SPp *r CR; ufac taro is ttslutican dire. tsaa tit ccnditto s mitt ns sire st FOR The force of some, soils, however. ce ;coded to surfaces by a bard that even w high pressure wall :tat Neat Extra Muscle Prepainr Cleaner contains idpue Pend of cleaning aeents which break owing Mescal to be w,,atral away, ',duct in a pressure washer better results than with Lu1inn according to: the e for tube into the. mixed Mx r For Pressure washer j Injector. Soil Condition $ ?t lli2ury For'1 Gal. of Pre-1MMrx Add: oz t For 5 Gal. of Pre -Mitt Add: Media arty 24 oz. 4 G. 6, PRO RUES 1.f12 . Yes Ming Pars. .... ... Free —trio Punt w . x . . Freeze/Thaw Stability. t R Hazardous i Fi w. 35x bL _AsSupplied, _„.t1.s_...,r .,013 pHi 10oziGa'l'...10.5......,..0010 t @5cz G ..,.9':5...,....„O.0 's j1czJGt',....ti7.5...v..,n.0.001 7. COVE C. LCi L TO tv'ticulate the total Surf'a z area :. € dt to tt cleaned by multiptwlug. the by height or width in feet. Length X Height = Total: Sq. Ft. X To determine the ap4irnzhn ttu g llda 01 No Rine Prepaint Cleaner cxrrt nt to required: a) tSelect light. Medium or Heavy fluty from b) Fend the Square Feet of Coverage closest to the Total Surface Area Square Feet to he cleaned c) Use the numbers in the "Gallons of Concentrate" cotatnn for an estimate of the gallons needed to clean a fiat; smooth surface using a low pressure spray applicator d) Fos l protrs. fir' corrugated surfaces: Muthe) For ttiglt prestltrrp spray applications: Multiply Gallons x 1 3. FIELD EXTERIES CE Macltine Tool. ML7uufacturer Prepaint cle"arcing of used machinery -- Replace trichtoroethane: Spraying and wiping surfaces to re.rnov grease and oil residue efure applying a urethane coaling.. Diesel Truck Garage - repaint cIc>aaing 11e ivy coating ra sprayer followed tx°ith a high pressure clear water. Paper Mill �.. Prepain Removing grease, oil and paper dust Applied solution with a tank -type sprayer. Spray rinsed with clear ws!e using a pressure sprayer. achine Wood Deck. Cleaning Softening and removing solid latex stains Removing ground --in dirt Applied dilute solution with a tank -type spray°er. Alter a short contact time, rinsed vital high-pressure sprayer. Textile till Prepain Sprayed a dilu with an airless unit altos, contact time. Spray~ rinsxd w;atesr. Prepaint Cleaner is doaatcr ued1i trak�atd>rd United Sta Gailom car Coraterxrate 2121.03 ssat+daae 20) SOO 9. SAFETY ;� N Extra Muscle Prepaint adattte, noon-flatnrnable, non-earC.inc. butyl, silicone, 1.0.40.000 iTy C" fuscle Prepaiut Cleaner has ad with an A-1 category surfaces or for use or mechanical cleaning departments of USDA inspected, fac 11. AVAZ : Extra Mu. avaitatlie through throughout the manufactured in Livonia. 1. write Great Lakes Labi atories. of fides and distributors. Enra Muscle Prepaint Cleaner is available in I gallon plastic bottles 14 per c=ate i, 5 gallon plastic pails with reelosahle .spouts for pawing, and 55 gallon pet; stiff:. drums, 12ECIjTC:AL SERVICES Technical advice furnished by Great take Laboratories. Inc. concerning my use: ax appltoaaion of Extra Muscle Prepaint Cleaner is reliable as current technology allows and the company makes no °xarran y, e press tar 'ed. of any use oar apptkatirtn fa,ar which such advice. is furnished. Technical as istartce and information is available upon request tv writing or calling Great Lakes I.ab+atan arias Inc. toll -free at (KO): Y)p 888-1 1ll5, Is City of Yakima Small ks - Invitat 226215 Page 41 of 45 1 13.05A Pro lndustrialTM Pro-Cryl® Universal Primer 566-1300 Series CHARACTERISTICS Pro Industrial Pro-Cryle Universal Primer is an advanced technology, self -cross -linking acrylic primer, It is rust inhibitive. and was designed for both construction and maintenance apple -aborts, It can be used as a primer under water -based tx solvent -based high -per toccoats, Features: * Rust inhibrtve, corrosion resistant * Singlemponm * Early mots • Fast dry * Lower temperature appEcation 35`F * Interior and exterior use * Suitable for us in USDA inspeed facilities For use on property prepared: Steel, Galvard & Aluminum, Wood Finish: LOW Sheen Color.. Off Mite, Medium Grey. and Red Oxide Recommended Spreading Rate per coat: Wet 5.0-10,0 Dry mils: I 9-3.6 Coverage: 1eo-32o sq. ft. per gallon Thecret.„ cal Coverage! €09 sq. ftper cotton g mil dry Approximate so'earing rates are caculaed vourrie sows aid 60 rOttridu% 3ny apScatiorl lOsS Note: Es' cc sair 3OpV—ItiOn may require rumple 00.3 to aCtieve rroxrotcl roar Tdatless anti critiorrty or appearartOe Drying Schedule ift 6.0 mils wet, i§ 50% RH: Orliing and recoat 'tenet ate temperature, Norticitty, 3'4 nlot Votress deperdert 1ti177°F 42120°F To touch hops 40,rtimites20neves Tack free 8 hours 2 hours 1 hour To remiss% 10 hours 4 hours 2 hours Tinting: DO NOT TINT Extra White 866W01310 rt.i.ay Vary by soct,ior) V.O.C. (Iess exempt solvents): less than 50 grams per litre: 0,42 lbs. per gallon As per 40 CFF's. 5,9.406 Volume Solids: 33 t2% Weight Solids: 50 .12% Weight per Gallon: 10,09 lbs Flash Point: NO, Shelf Life; 38 months, unopened 212Cr28 ATTACHMENT D — Pro IndustriaITM Pro-Cryl® Data Sheet COMPLIANCE AS or vosizon. Comptes W1!1 Yes Yes Yes Yes Yes Yes Yes Yes OTC OTC Phase 0 CARB GARB SCM 2007 GARB SCM 2020 Canada LEED6' v4 & v4.,1 Emissions LEED" v4 & v4,1 V.O.C. Yes EPD44SP Certified Yes MR -Manufacturer Inventory Yes MPt'0107, 107 X-Green'. 134 APPLICATION Tempera lure: intrrium 3$71 1,6•C nitro= 2D•F ,4186C xr,..surra:e and matena At east 5•F aative dew point Rotative humidity: 65.% maximum tnr,oioirig I: 3 pew, Vlavert sl'evurer., Ifej to =et revulee fcr snspe.sorsy Moor tnne SerS'y L-Quierz Were use *VI SSted reetces.AtmluCtlerf, rrs,Z be cremsusZeSe *V) Sne ranti,e ervefor, SS 3re =viewer, ciwaramz. Reducer. AKINS Spray: Pressure OSe Ttp nt1on1 spay ut't Eats S5 iLici talorzIe 66 o=le 63 Pe * ',maw Pressure 60 o s ressure 25 o As needed up to 5% oy votwe roa kryton-poyester. 5tfl z35 PurdysxLe Roller cover IS Inch woven, suon as COntraetios SerieSf Gott WO'ret) Iseces 363e4sattse e' 5Vet! zbree ezzAr3ent. e,31 be v-tt%trel Water 2600 11'e—trim LO. S15,019 inch 60 mesn Apply paint at the recommended film thickness and spreading rate as indicated. Appicato; n of coating above maximum or beim rrta-mmum �mm rate may adversely affect coatrig perfomiance. Striae coat crevice' s, welds, and shaman/es ttij early Paiute in these areas. For best results on rusty surfarr, always apply ,frst coat by trush, When usrig spray applcatCo. use a 50% overlap with each pass of the to avoid hordays. We areas. and pinholes_ t! necessay, cross spray at a right angie, painting should be done immediately after a in or during foggy weather, optimal p .;erarmance, ths primer should be topcoated Fcr exterior exposure. this Firmer should be olmated wittim 14 days. If 14 days is exceeded remove ail surface contamination by washing with an appropriate dearer, rise thoroughly and goo to ry. Finish wth approprate topcoat. Wrtivit sher4n-wilhams.com SHERWIN WILLIAMS SPECIFICATIONS Acceptable Water Based topcoats: 1-2 coats Pro industrial Acrylic Coating or Pro triclustnal Acrylic Dryfall Pro Industrial DTM Aoryiic Pro Industrial Mtib-Surface Aoylic Pro Industrial Pre -Catalyzed Epoxy Pro Industrial Pre -Catalyzed Uthe Pro Industrial Water Based Acrotort 1C0 Pro Indusuial Water Based Alkyd Urethane Pro indLstn..31 Water Based Ca Epoxy Sherwin-Williams Architectural Coabngs Acceptable Solvent Based topcoats: Pro Industrial High Ferxmanc6 Epoxy ro Industrial Industrial Enamel. s Tile Clad HS Epoxy The finishes listed above are representative of the product's use. Other finishes may be ppropriate. continued on back City of Yakima Small Works Invitation to Quote 226215 Page 42 of 45 Pro Industrial Pro-C Universal Primer SURFACE PREPARATION WARNING! If you scrape, sand or remove old paint, you may release lead dust LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE. ESPECIALLY IN GHILOF .N. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NMDSH-approved resparatcr to coned lead exposure. Clean up care ft yr welt a HEPA vacuum and a wet mop. Bette you star find out how to protect yourself arid rtur family by contacting the 'National Lead Information Hotine at 1-900-424-LEAD or log on to w. w epa,gavflead. Do not use hydrocarbon solvents for cleaning_ R rive an surface t sit rr natkan by washing with an appropriate cleaner. rinse thor€u" and allow 11) dry: Extting peeled or checked p should I* scraped and sanded to a sound surkace. Glossy surfaces shocid be sanded cult Stains from water, smoke, irk. penal;, grease, etc: shcacid be sealed with the appropriate p r Recognize tint any surface preparation shoe dicta, remcaral of the old coating' may ccnipn rase the s€:rvyoe length of the system. Iron 8, Steel - h4r#rrurn surface preparation is Hard Tad Clearing per SSF S Remove all cad and grease: from the surface per SSPCrSP1. For tamer perfcxrrs3rsce, use tial Blast leaning per SSFG$Pt3. Prime the area the same day as cleaned. Self wining, Alter/Mum - Rensvte all od, greasecirt, coade and other fore s material per S. ,r aP1. SO priming, Gal&aris'ing • Atom to weather a rein' ;<m CIF Six nracrtla prier to coking. Solvent clean per SSPC- SP1. When nvea/seizing is rot possible, or the su!a tie has been trexed ,Wish chlorates or s+Scates. frst Solvent aeon per SSPGSP I and apply a test patch Mow paint to dry at least one wee* before teak)" adhesion. If adhesion as poor, bush blasting per SSPC-SP 18 s necessary to remove these treatment Rusty galvarisang regllire"s a rrir axon d Hard Taal ceaning per SAC SPA prtirne the area the same clay as sf priming, Previously Painted Surfaces - If in sound oandttan, dean the surface of all foreign rrraCerial, Smooth. hard or glossy coatings'and surfaces shocid be dulled by alxtefing Ise surface as test area, atloarng pant to dry one wee testing adhesion. If adhesion is poor; additional abrasion of the surface andbr remora) cf the precious cr acing may be necessary. Retest surface far adhesion. If paint is peeling or toady weatls red, dean surface ter scund substrate and teat as a mew ,odor as above, Recognize that any surface preparatiets short cf icxa removal of tine cod coaling may use the service length of the system, Wood • Surface mast be dean„ dry and scxmd. Prime with rsr met d primer. No paarong shoed be done irrrrs yafter a ran cr curing foggy weather. limits and pitch streaks must be scraped. sanded and spot primed before full C031 al prirr>:r is applied. Al trail holes cr small openings must be property calked SURFACE PREPARATION Miidewrr- Clean mildew from m the Surf fungus that looks Eke cSrs but won't wash off,. Mildew mat be removed before panting, or it will gnaw through any new coat of pant, To remote rruldew or suspected xr Gdew, sails surface before pairrting with a rlarrlerc al rrtldew remover fcbowing manufacturer's safety instructions. PERFORMANCE Tested: (unless otherwise ind'tcatedi feel Surface Preparation: Finish: l coat Pro Industrial 1 coat Pro Industrial A Adhesion: Mehod: Result Corrosion Weathering; Method: ASTNI 05094. 10 cycles, 338I1 Result Pas Direct Impact Resistance: Method. Result; Dry He Resistance: Method: Result Flexibility Method: Result greater than 1 A Moisture Condensation: Resistance: Method: ASTM D45115.100'F, 1250 hours Result Passes Pencil Hardness: ldeth©d: Result Salt Fog Resistance: Methtxe Result Tryerema.onand rectre er4'atorssettarn7a"rsPrp4Ust arc recommendations suet roan rsr-ren ''e sUrle= 1G mange vise wini pantoot ,,.con to ocean tie most avert version or ASTM B117, 1250hours Passes SAFETY PRECAUTIONS ing, carefully read CAUTIONS on Label. Safety Data Sher (SOS) be re FOR P Tti P, FRC Y. CLEANUP INFORMATION spacers, hands and tools use with soap and warm mean 1ng,. lush spray eq t tnt;n solvent to prevent nrstng of Wow rvtanttfacturer's safety when using sc' eats. B65,1V91310 12 39 56,54t0132 f 13 33 5Fz lf•31310 t2 33 City of Yakima Small Works — Invitation to Quote 22621S Page 43 of 45 124,01 Sher-Cryr HPA High Performance Acrylic 866-300 Series Gloss, 866-350 Series Semi -Gloss CHARACTERISTICS SHER-CRY L HPA is a higher performing ambient ord. one component annyec coating with excellent perforrnarae propertic-s. Features: • Chemical Resistant • Outstanding humidity resistance • Outstanding application diaractenstics . Flash rust -early rust resistant . Corrosion resistant • Fast dry Suitable fix use in USDA ebciflt Recommended for use in: • Buildings & Warehouses • Equipment & Machinery • Storage Tanks & Pon a Structural Steel • Manuraccuring F acil rties & New Coristuoti on • Interior or Exterior For use on property prepared: Steel, Gaivanized & Aluminum, Concrete arid Masonry, Wood Previously Painted & Zinc rich primers Finish: 8,0°+4.50' G kiss 35-45'igekSerni-Gloss Color, Most colors Recommended Spreading Rate per coat: 5x7a wade 5e6W0411 jYlet Wet mits: 8,0- 10.0 Dry mils: 2_0-3,3 Coverage: 1 80-284 ft. per gallon Theoretical Coverage: 52q Lper galort 1 ird dry ire spreading MOS ar3 C34O.13*3 on viourne aro do not rouse any appicatort toss Dram or roe voice:on may rewire rnutpe coaZ ve maximum ten TItstie54 and irircritity Drying Schedule 7.0 mils wet, @ 50% RH: oly.7.4„ and P*003iirnea3M zeriperisaire.N.MOny, and aim traiwiess dependent e50°F 77*F @ 110°F To touch I hour 30 minutes 5 minutes To hand 8 hors 5 hour 15 minutes To reccat 8 hours 5 hour 15 minutes To cure 30days n days 30 days Tinting with CCE only: Base oz. riermicn Edra White 0-4 Ultradeep base Ir.-12 Extra White 866W00311 :nay ey V.0 C. (less exempt solvents): As mixed 230 grams per atm lbs per gallon Af.r.tr4LA-R 5943S Volume Solids: 33 t2% Weight Solids: 42 254 Weight per Gallon: 44 lb Flash Point fil/A Vehicle Type: Acrylic Shelf Life: 38 months.. ursopened 0412021 ATTACHMENT E — Sher-CryITM HPA Data Sheet COMPLIANCE As cr 04179,202 t. Comptes writ OTC OTC Phase It S.CA.O.M.D. CARB CARB SCM 2007 CARB SCM 2020 Canada LEEtr v4 3 v4.1 Emissions LEE:0* v4 & v4.1 V.O.C,. EPO•NSF" Certified MIR-Product Lens Certified MPI-(Gicrss) Yes Yes No Yes Yes Yes Yes No No No No Yes APPLICATION Temperature: at 'surfaceand material minimum 50°F / 10°C risau MUM 120°F 41rC At /east 5°F above dew point Relative humidity: 85% ' me rotiowing is 3 guide Cnanges f.n pressures arra tip sues may Pe needed tor pniper spray characteristics. Always purge spray equipment before uSE 4111£71 NSW raOtiCar„ Any mouction must tie compatioe with the existrig enveorimentai and appacation oarrstionsw.ater Reducer R8K10 WB Hat. Weather Reducer up to 10% Airless Spray: Pressure 1500 p„si, TH°5eFfiter .017 - .021 inch 114 inch 1,11 eo mesh Conventional Sprayt Gun Elnks 95 Fluid Nozzle Air Ne.1e 83 P Atomization Pressure 1.5-205° r:13 61 Fluid Pressure Reduction: As needed up to s2:S% by volume Brush Roller Cover inch war r specific arelration e<Wrient ts hoed aPove„ equvaent equarrient may be suosatuted, Apply paint at the recommended Irn diickness and spreading rate as indicated co hoot Application arcoatng above maximum or minimum rcrnrded acing rate may 34averso,ny affect coating rates arecalculated on volume scuds and include an c3t. loss factor due to surface profile, rrJuOhnGS5, o rcstv of the surface, skill. and rechntque of applicator, method of aPfalication„ VanOtIS surface irregularities. matenal lost during mixing,. spillage„ over thinning. cumatic conditions. and excessive film build, Apcnc.ation ternpenture above 05`F (35T) may cause dry spray. uneven sheen. and poor adhesion. Appeir.ation temperature below E.YF (10°C) may cause poor adhesion and lengthen the drying and ring time. " paint thoroughly to a uniform conSiStency with 00w speed power agitation prior to use, ioe coat creinces. welds. and sharp angles to t early fature in these areas, using spray application, use a 50% csterlap each pass of the gun to avoid holidays, bare • and pinholes, If necessary, cmss way at a ring the early stages of dryingthe coating is tve to rah dew. high humidity and moisture on Plan painting schedules to avoid ntluence dung the first 18-24 hours of wvoiesherwitiwvietarnscom SHERYWN WILLIAMS SPECIFICATIONS Industrial Pro-Cryl Primer Industrial OTM Primerrrinish or Kem Bonds HS or Zinc Clad XI 2 coats Sher -Cry HPA Aluminum: mats Sher -Cry HPA uminum: coat Pro Industrial Pro-Cryt Primer coats Sher-Cl HPA ncrete Block (CMU): t Pro Industrial Heavy Duty Blocicfiller on Acrylic Block Surfacer 2 coats Sher-Cryl HPA nereteasonry: t Loxon Cordxete & Masonry Primer on Conclitoner Sver-Cryi HPA coat PrtiMar 200 Zero V.0,C. Primer 2 coats HPA lvantring: its Sher-Ory HPA Finished Siding: (Bake -cc finishes) t OTM Bonding Primer ts ShenCryi 14PA Previously Painted: Sher-Cryi HPA exterior coat Exterior "Wlood Pnrner 2 coats Sher-Cryl HPA interior: t Premium Wall & Wood Pnmr ts Sher -Cry HPA rns listed acme are representative ot $USe,, raw systems may be aportionate I be 33illv9031ei continued on back City of Yakima Small Works — Invitation to Quote 22621S Page 44 of 45 st, r,e per PC-$P 1, use city detergent Wired by a hydrocarbon solvents for mnado t by washing with an thorougnry aexf allay to dry paint shoxfd be souped see, Glossy st fazes tat s from water smoke, be sealed wet the that any stur`ace of the cod ocatr g t of the system. bon Mond grease Sher-CryI High Performance Acrylic SURFACE PREPARATION yfARMING! Renaavai of eld part by satd'rrtg sor3png or dater means may generate duster sores cax>raut lead Expos: -re to kora dust cr fumes may cause train darroge cr rater adverse heath ef=ects, espec ily ,n children or pregnart women Control ng 'exposure to lead et other ha:xrdcus requires the use of proper preste:tive umrt. such as a property feted resptafor (NIOSH approved) and proper c 1timect and cleanup, For m e n'arta iron. tail the National Lead Center at 1 { 1 2t #l) (in US) cr contact your local health autory, •1, cle may Iron Tod from use any occurs_ Aluminum - Remove all of other `creigtt material per. SS Gaivartezing - Allow to weather a months pncr to mating, Solvent Crean S 1 'Mien weatherng is mat possible. cr the surface has been treated with civerrtates or skates. frst Solvent Clean per SSPC-$PI and appy 3 test parch All m pant to cry at least crie week Wore *strip ado son. if adhesion is poor, brush bias ng per .5PC-SPid s necessity to remove these treacrrgirrts, Rusty gaivana red a min r run of Hand Trail Clewing per P2. pane tie area the same day as mod. Concrete Block - Surface should be triontogNY clean and dry Air, magi! arad surface *ernperature s must be 31 least 50•F ti I0 C1 befece Ring, Use Pro industr,a Heavy Lhay Blotto Fdier or Lemon Acrylic Bieck Surfacer The Slier must be thoroughly try" bre citing. Masonry - F} masorry must be free o rtita d, grease.. arse parr., mortr, ^y dust etc. Cean per S`.PC-rF'13-,Woe NCR! W. 1024. MP 1.3, Polo;c, troweled, or bk'.p ocrcrve pier,.. mortar etc, must be etCrcaughly cared at least 20 days at 75°F, Form re/ease rxtmpocrnds and currg m es must be removed by !rush bbsr g. be ...Vowed to weather for one year prior ter stritaoe r 'd panting., Prime the area the same day eattered and soft or porous nest be brush red Pr purer t of loosely adhering coraarnraton firm surface. Apply cne c aC fed:wing label SURFACE PREPARATION Ptt ished Siding (baireckin finishes} RemoNe GIs gt'?�, dirt, owes, and other contarr marts from sutf� by ckearing per SSPCSP1 or water blasting per `-LACE Standard RP-01-72. Always checks for cerrpa1ib by of the prevousty panted surfa'he with the new cicixng by appiying a test peen of 2 - 3 square feet .Mow to ay thoroughly for t week bektre cAeUing adtesit i GTM Beeulrg Przrter s requred.. Previously Painted Surfaces - tf n sound condition,, clean t e s ce cat al ma -ai. Smooth hard or glossy coangs and .. should be dulled by atiaang the surface Apply a tesi area, albrng pans to dry ,one week belay Testing aehesion. If achesen is poor, addeonal abrrson of the surface arxiar rerresal of the previous coating may be necessary Retest surface for adhesionIf pant is peeing cr badly weathered. dean surface to sound substrate and Mt as a new Srurface as above„ Reoognze that any sieace preparation short ce total reenithei of the cid mating may compromise the service krggth ch the system. Mildew- Prior to attempting to remove mivv, bt s always r rate to test any deareer on a smolt' to use, 83e3and beaching disecbr exstrg parv. rtg solutions may be nth l by washing and 3 pars water, red area Moe 10 minutes. PERFORMANCE s ner-Cryl FiPA G ices- 2 cones 3 0 mica 0,F.T per coat w.rrc . a ror4, Abrasion Resistance: !Method: Results: Adhesion: Method ASTM E 4541 Results: 947 psi Corrosion Weathering': Method ASTM D5884, 7 cycles Results: Corrosion 8. Ec3stering 10 Direct Impact Resistance:. Method: A TM 02794 Results: greater than lid in. lb Dry Heat Resistance" Method. ASTM 02485 Method A Results: 300°Ff149'C Flexibility:. Method: Results: Humidity Resistance': Methoct ASTM u455 .21S13 hours Results: Corrosion 10, I3Ssterinp 11k ASTM p4O20, CS 17 ' M+ee1. 1000 cycles, 1 kg load 58,1 clog loss Dli=, 180' bend. Pencil Hardness Result c b3' mandrel Pass " 1 Coat Sner•Cr ?IPA o ex 1 COX PCP rti3US1113 ,-Pt Crrt umiersar Parer Pro ices p drsn3r ro rhpara se to pmducts ":n lets or Me Fe4erat Sye rica2on MS0570„ ano Paint `'rpeordexo t ,f.t0 CiPalr„ SAFETY PRECAUTION read CAUTIONS on label_ Sheets (SOS) beibre use, FOR PROFESSIONAL USE ONLY Published StitieCto chang Sh `rt-Witlarns technical d3a and instar ins, CLEANUP INFORMATION CIe$n spills, spatters, hand; and toots immediately after use vr,h soap 3rxd warm crater., After cleaning.. flash spray equipment wth compliant cleanup solve -re to prevent rlstng et the equip tk Follow n-,anufacturrehs safety recthrntraesrtt s vtten rasing sof.ens MOM' rtoTW r1atat Fg C b5eW6, 311 2s 214 955TC0304 21 6 6°rit12351 24 234 ee5Too35s 24 241 The thtormatianand recammer3ar ssettornnros arsducf.Oatastreet are aaseaupon termsdon:we: abyoronaerraarorToeSoeraa~iwitianscompany.,sucninforrmation ant rec ceri'renear 00s set corn rterern are suclect to orange ane pertain to the viaduct offered, at 2'e srn.e tt publication. Consul you" ttnerntn-W;1tan5 represerla5ve or • tea unin pamtcs.ccwmhsootahmemoltarraent.vess°0nVtnePOSana'oran:aS, City of Yakima Small Works - Invitation to Quote 22621S Page 45 of 45 129 North 2Pd Street June )26 Yakima, Washington 98901 I)ear'S it or Madam: Subject: Quote 22621 S Paint Roof -- Transit Transfer Center AddendumNo. 1 Please see below the following questions that were asked ley, Contractors during the Site Visits. l . Q. Are the gutters to be painted? A, Yes, the guttc^t's '_ t: be la ittted MI Quotes are due on or before June 25, 2026, at 2:00 PM v submit your Quote late, it will not be reviewed or considered. V subject line of your email "Quote 22621S Paint Roof— Transit Qa roof, 1 to S'us tn.Knotts@Yakima\VA.Gov. If you ubmitting your Quote, please put in the fer Center", Acknowledge receipt of this addendum on the signature page of the Quote Form (page 5 Quote document. Susan Knotts, NIGP-CPP, CPPO, CPPB Buyer II tt he Invitation to EXHIBIT B Contractor's Quote QUOTE FORM CONTRACTOR TO FILL OUT THIS SECTION Contractor Recommended Process/Materials if Different Then Specifications: Contractor agrees to specified process/material. Additional Materials/Labor Required: Number of Days to Complete Work: Comments: Quote is Firm for : 30 Days (Minimum of 30 Days) 1 Guarantee: (Minimum of one (1) year on work) Warranty: (Minimum One (1) years on materials) Delivery Terms All materials are to be quoted F.0,6. destination. All anticipated shipping costs necessary to meet the delivery schedule must be included. No additional charges for shipping or handling will be allowed, Item No. Description All labor and materials to paint (prep, prime and finish) administrative building, two waiting shelters and bathroom roofs (topside only) Qty. approximately 3.062 ADDITIVE OPTION All labor and materials to paint (prep, prime and finish) clock tower roof (topside only) 225 Unit Type SF SF Price per Unit 11,945.00 Tax 8.5%: TOTAL: $1,220.00 Tax 8.5%: TOTAL: Total Price (without tax) 11,945.00 $1,015.33 $12,960.33 $ 1 ,220.00 $103.70 $1,323.70 City of YakimaSrnall Works — Invitation to Quote 226215 Page 4 of 45 QUOTE FORM In signing this Quote we certify that we have not, either directly or indirectly, entered into any agreement or participated in any collusion or otherwise taken any action in restraint of free competition; that no attempt has been made to induce any other person or firm to submit or not to submit a Quote; that this Quote has been independently arrived at without collusion with any other Bidder, competitor or potential competitor; that this Quote has not been knowingly disclosed prior to the opening of Quote to any other Bidder or competitor; that the above statement is accurate under penalty of perjury. We will comply with all terms, conditions and specifications required by the City of Yakima in this Invitation to Quote and all terms of our Quote. Company Name Finnery Construction Inc. Company Address 5878 SW 44th St. Port Orchard, WA 98367 Narne of Authorized Company Representative (Type or Print) Mallory Bergemann Title President Signature of Above Email Address finneryconstruction©gmail.com WMBE/D;E Vendor Certification Number (if applicable) Phone Number (360)621-2121 hereby acknowledge receiving Addendum (a) (Use as many spaces as addenda received.) City of Yakima Small Works — Invitation to Quote 226215 Page 5 of 45 BIDDER RESPONSIBILITY CRITERIA FORM (Contractor tosubmit with Qtjmf*Fonr) it is the intent ofCity to award a contract tmthe |om/ responsible 6idder. Before award, the bidder must meet the following bidder responsibility criteria to be considered a responsible bidder. The bidder may berequired bythe City tosubmit documentation demonstrating compliance with the criteria. The bidder must: 1. Have a current certificate of registration as Contractor in compliance with chapter1Q.Z7 R[VV' which must have been ineffect atthe time ofquote submittal; F|Ny�ECi778N{� [ontmctor#� �������� Effective Date: Expiration Date: 8/ 3/2077 2. Have ocurrent Washington Unified Business Identifier (UB|)number; 605294985 3. if applicable: a. Have industrial Insurance (workers' compensation) coverage for the bidder's employees working in Washington, nsrequired inTitle SI R[VV; |saccount current? No (Yes/No) b. Have aWashington Employment Security Department number, as required in Title 53 R[VV; # No c. Have a Washington Department of Revenue state excise tax registration number, as required in Title 82R[W; # 605294985 4. Has Contractor been disqualified from bidding on any public works contract under RCW 39,06.010 or 39I2.065(3). |sContractor disqua|iMm� disqualified? (Yes/No) S. Until December 31, 2013, not have violated more than one time the off -site, prefabricated, non-standard, project specific items reporting requirements ofR[VV39,O4-S70. Does Contractor have violations? No (Yes/No) 6. For public works projects subject tothe apprenticeship utilization requirements ofR[VV 39.04320, not have been found out of compliance by the Washington state apprenticeship and training council for working apprentices out of mho, without appropriate supervision, or outside their approved work processes as outlined in their standards of apprenticeship under chapter 49.84 RCVV for the one-year period immediately preceding the first date ofadvertising for the project. lsContractor incompliance? Yes (Yes/No) 7. Per RCW 39.04.350 and RCW 39-06.020, has the Contractor had Labor and Industries Training or are they exempt? Training Complete 0 Exempt [] |sContractor incompliance? Yes (Yes/No) 0. Federa|SuspensionandDebarment:Thecontractorcertifies'thatneither|tnorits"prindpa|s^(osdefimed in 49 CFR 29�I05(p) is presently debarred, suspended' proposed for debarment, declared ineligible, or voluntarily excluded from participation in this transaction by any federal department or agency. City of Yakima Small Works — Invitation to Quote 22621S Page 11 of 45 Subcontractor Responsibility 1. The Contractor shall include the language of this section in each of its first -tier subcontracts, and shall require each of its Subcontractors to include substantially the same language of this section in each of their subcontracts, adjusting only as necessary the terms used for the contracting parties. The requirements of this section apply to all Subcontractors regardless of tier. 2. At the time of subcontract execution, the Contractor shall verify that each of its first tier Subcontractors meets the following bidder responsibility criteria: a. Have a current certificate of registration in compliance with chapter 18.27 RCW, which must have been in effect at the time of subcontract quote submittal; b. Have a current Washington Unified Business Identifier number (UBI); If applicable, have: a. Industrial insurance (worker's compensation) coverage for the Subcontractor's employees working in Washington as required in Title 51 RCW; b. A Washington Employment Security Department number as required in Title 50 RCW; c. A Washington Department of Revenue state excise tax registration number as required in Title 82 RCW; b. An electrical Contractor license, if required by Chapter 19.28 RCW; c. An elevator Contractor license, if required by Chapter 70.87 RCW. 4. Not be disqualified from bidding on any public works contract under RCW 39.06.010 or 39.12.065 (3). 5. Until December 31, 2013, not have violated more than one time the off -site, prefabricated, non-standard, project specific items reporting requirements of RCW 39.04.370. 6. For public works projects subject to the apprenticeship utilization requirements of RCW 39.04.320, not have been found out of compliance by the Washington state apprenticeship and training council for working apprentices out of ratio, without appropriate supervision, or outside their approved work processes as outlined in their standards of apprenticeship under chapter 49.04 RCW for the one-year period immediately preceding the first date of advertising for the project. 7. Per RCW 39.04.350 and RCW 39.06.020, has the Subcontractor had Labor and Industries Training or are they exempt? Signature by person authorized to certify information included in Bidder Responsibility Criteria Form: Mallory Bergemann, President Printed Name, Title 612312©26 Date City of Yakima Small Works — Invitation to Quote 226215 Page 12 of 45 Certification of Compliance with 'Wage Payment Statutes te Form) (Contractor to srsbrni The bidder hereby certifies that, within the three-year period immediately preceding the quote solicitation date (6/25/2©26 ) that the bidder is not a "willful" violator, as defined in RCW 49.48.082, of any provision of chapters 49.46, 49,48, or 49.52 RCW, as determined by a final and binding citation and notice of assessment issued by the Department of Labor and Industries or through a civil judgment entered by a court of limited or general jurisdiction. I certify under penalty of perjury under the laws of the State of Washington that the foregoing is true and correct. Finnery Construction Inc. Bidder Signatu of Authorized Official" Mallory Bergernann Printed Name President Title 6/23/2026 Date Port Orchard WA City State Check One: Individual 0 Partnership 0 Joint Venture 0 Corporation State of Incorporation, or if not a corporation, State where business entity was formed: Washington If a co -partnership, give firm name under which business is transacted: * If a corporation, proposal must be executed in the corporate name by the president or vice-president (or any other corporate officer accompanied by evidence of authority to sign). If a co -partnership, proposal must be executed by a partner. City of Yakima Small Works — Invitation to Quote 226215 Page 13 of 45 DEBARMENT AN_D SUSPENSION ATTESTATION (Contractor o rbm t with Quote Form) If this Contract qualifies as a covered transaction under federally funded grant requirements, the Contractor certifies compliance with the following: a. Neither the Contractor, its principals (as defined in 2 CFR §180.995), nor its affiliates (as defined in 2 CFR §180.905) are excluded or disqualified as specified in 2 CFR §180.940 and §180.945. b. The Contractor agrees to comply with the requirements of 2 CFR Part 180, Subpart C, as adopted and supplemented by 2 CFR Part 200 (Uniform Administrative Requirements, Cost Principles, and Audit Requirements for Federal Awards), and further ensures that any lower- tier covered transactions entered into as part of this Contract will include a requirement for compliance with these regulations. c. The debarment and exclusion status of entities can be verified at ht_tps.J!wwwsam.gov4 The Contractor hereby certifies that all information provided in this attestation is true, accurate, and complete to the best of their knowledge and acknowledges that this representation is a material fact upon which the City of Yakima relies. The Contractor affirms its commitment to remain in full compliance with the requirements of 2 CFR Part 180, Subpart C, and all applicable federal regulations throughout the duration of this Contract and to require compliance in all lower -tier covered transactions. Furthermore, if it is discovered that the Contractor knowingly provided false certification, the City of Yakima and the Federal Government may pursue all available remedies, including, but not limited to, suspension or debarment, Signed this 23 day of June , 2026 Contractor's Name Finnery Construction Inc. Name a Title of uthorized Representative Mallory Berg emann, President Signature of Authorized Representat City of Yakima Small Works — Invitation to Quote 22621S Page 14 of 45 BID BOND KNOW ALL MEN BY THESE PRESENTS, that we Finncry Construction Inc, as Principal, and Merchants National Bonding Inc, a corporation organized under the laws of the State of IA , as Surety, are held and firmly bound unto City of Yakima WA, as Obligee, in the sum of FIVE PERCENT OF THE TOTAL AMOUNT BID (5% of total amount bid) for payment of which SUiii well and truly to be made, Principal and Surety, bind ourselves, our heirs, executors, administrators, successors and assigns, jointly and severally, thinly by these presents. WHEREAS, the Principal has submitted a bid for Paint Roof - Transit Transfer Center NOW. THEREFORE, if the Obligee shall accept the bid of the Principal and the Principal shall enter into a Contract with the Obligee in accordance with the terms of such bid, and give such bond or bonds as may be specified in the bidding or Contract Documents with good and. sufficient surety for the faithful performance: of such Contract and for the prompt payment of labor and material au-Ili:shed in the prosecution thereof, or in the event of the failure of the Principal to enter such Contract and give such bond or bonds, if the Principal shall pay to the Obligee the difference not to exceed the penalty hereof between the amount :specified in said bid and such larger amount for which the Obligee may in good faith contract with another party to perform the work covered by said hid. then this obligation shall he null and void, otherwise to remain in Rill force and effem Signed and scaled this day: 6/25/2026 PRINCIPAL: Finnery Construction Inc By: SURETY: By: Merchants National Bonding Inc Cameron Huntsucker Attorney-inzgoict..,. 0 NA .."*. soixi3 0/4. 11 . 4 4!' 2003 CONFORMS TO NA DOCUMENT A310 2/70 ED. MERCHANT'S BONDING COMPANY,. POWER OF ATTORNEY Know All Persons By These Presents, that MERCHANTS BONDING COMPANY (MUTUAL) and MERCHANTS NATIONAL BONDING, INC., both being corporations of the State of Iowa, and MERCHANTS NATIONAL INDEMNITY COMPANY , an assumed name of Merchants National Bonding, Inc., (herein collectively called the "Companies") do hereby make, constitute and appoint, individually, Alexa Bevil/; Cameron Huntsucker; Justin MacFayden; Kara Skinner Mercedes Trokey-Moudy; Sierra Maine their true and lawful Attorney(s)-in-Fact, to sign its name as surety(ies) and to execute, seal and acknowledge any and all bonds, undertakings, contracts and other written instruments in the nature thereof, on behalf of the Companies in their business of guaranteeing the fidelity of persons, guaranteeing the performance of contracts and executing or guaranteeing bonds and undertakings required or permitted in any actions or proceedings allowed by law. This Power-of-Attern.ey is granted and is signed and sealed by facsimile under and by authority of the By -Laws adopted by the Board of Directors of the Companies. "The President, Secretary, Treasurer, or any Assistant Treasurer or any Assistant Secretary or any Vice President shall have power and authority to appoint Attorneys -in -Fact, and to authorize them to execute on behalf of the Company, and attach the seal of the Company thereto,. bonds and undertakings, recognizances,, contracts of indemnity and other writings obligatory in the nature thereof." "The signature of any authorized officer and the seal of the Company may be affixed by facsimile or electronic transmission to any Power of Attorney or Certification thereof authorizing the execution and detivery of any bond, undertaking, recognizance, or other suretyship o obligations of the Company, and such signature and seal when so used shall have the same force and effect as though manually fixed." In connection with obligations in favor of the Florida Department of Transportation only, it is agreed that the power and authority hereby given to the Attorney -in -Fact includes any and all consents for the release of retained percentages and/or final estimates on engineering and construction contracts required by the State of Florida Department of Transportation. It is fully understood that consenting 10 the State of Florida Department of Transportation making payment of the final estimate 10 the Contractor and/or its assignee, shall not relieve this surely company of any of its obligations under its bond. In connection with obligations in favor of the Kentucky Department of Highways only, it is agreed that the power and authority hereby given to the Attorney -in -Fact cannot be modified or revoked unless prior written personal notice of such intent has been given to the Commissioner Department of Highways of the Commonwealth of Kentucky at least thirty (30) days prior to the modification or revocation. In Witness Whereof,. the Companies have caused this instrument to be signed and sealed this 3rd day of July . 2025 MERCHANTS BONDING COMPANY (MUTUAL) MERCHANTS NATIONAL BONDING, INC. MERCHANTS NATIONAL INDEMNITY COMPANY By STATE OF IOWA COUNTY OF DALLAS ss. On this 3rd day of July 2025 , before me appeared Larry Taylor, to me personally known, who being by me duly sworn did say that he is President of MERCHANTS BONDING COMPANY (MUTUAL), MERCHANTS NATIONAL BONDING. INC., and MERCHANTS NATIONAL INDEMNITY COMPANY; and that the seals affixed to the foregoing instrument are the Corporate Seals of the Companies: and that the said instrument was signed and sealed in behalf of the Companies by authority of their respective Boards of Directors. Penni Miller Commission Number 787952 My Commission Expires January 20, 2027 (Expiration of notary's commission does not invalidate this instrument) I, Elisabeth Sandersfeld, Secretary of MERCHANTS BONDING COMPANY (MUTUAL), MERCHANTS NATIONAL BONDING, INC., and MERCHANTS NATIONAL INDEMNITY COMPANY do hereby certify that the above and foregoing is a true and correct copy of the POWER -OF - ATTORNEY executed by said Companies, which is still in fult force and effect and has not been amended or revoked. in Witness Whereof, I have hereunto set my hand and affixed the seal of the Companies on this 25th day of Notary Public Secretary June .2026 . POA 0018 (5/25)